Hi all,
I have run a build with all the obvious candidates related to printing removed.
libtiff removal caused a problem at cdrom stage with perl-Imager as the rootfile for that included some tiff libraries, which were then not present in the build.
So I ran without libtiff and then modified the perl-Imager rootfile to match the results in the Imager file in the Log directory.
cdrom then completed without any issues but then right at the end of the build it comes up with the message "Checking for rootfile consistency and at the end says that the rootfiles are inconsistent but I can't figure out what the problem causing it actually is.
I have repeated the build three times with a reboot of my machine in between but that didn't help.
Would appreciate if anyone can help with what the issue is and what I need to go and fix.
The _build.preparation.log file only has the chroot: failed to run command 'env': No such file or directory.
There is not indication of which file or directory is missing. All the last entries shown in the log below are in the build and also in the rootfile.
Checking for rootfile consistency... /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/API.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/APIRef.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color/Float.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color/Table.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Cookbook.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/CountColor.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Draw.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Engines.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Expr.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Expr/Assem.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/ExtUtils.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/CUR.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/ICO.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/JPEG.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/PNG.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/SGI.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Files.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Fill.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/DynTest.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/Flines.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/Mandelbrot.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filters.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/BBox.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/FT2.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/FreeType2.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Image.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Test.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Truetype.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Type1.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Wrap.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Fountain.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Handy.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/IO.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/ImageTypes.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Inline.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Install.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/LargeSamples.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Matrix2d.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Preprocess.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Probe.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Regops.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Security.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Test.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Threads.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Transform.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Transformations.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Tutorial.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/interface.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/regmach.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/CountColor/CountColor.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/ICO/ICO.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/JPEG/JPEG.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/PNG/PNG.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/SGI/SGI.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/DynTest/DynTest.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/Flines/Flines.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/Mandelbrot/Mandelbrot.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Font/FT2/FT2.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Imager.so
chroot: failed to run command ‘env’: No such file or directory
ERROR: Rootfiles are inconsistent [ FAIL ] Check /home/ipfire/sandbox/ipfire-2.x/log_x86_64/_build.preparation.log for errors if applicable [ FAIL ]
Regards,
Adolf.
Hello,
On 10 Oct 2024, at 12:44, Adolf Belka adolf.belka@ipfire.org wrote:
Hi all,
I have run a build with all the obvious candidates related to printing removed.
libtiff removal caused a problem at cdrom stage with perl-Imager as the rootfile for that included some tiff libraries, which were then not present in the build.
So I ran without libtiff and then modified the perl-Imager rootfile to match the results in the Imager file in the Log directory.
I think the problem with the perl-Imager root file is that it contains “x86_64” which we scan for and then fail the build.
We do need to keep perl-Imager though as we require it to generate the QR codes for OpenVPN.
What other packages did you drop?
I think we might be able to get rid of these:
* lcms2 * ghostscript * qpdf * poppler * poppler-data * cups-filters * epson-inkjet-printer-escpr * cups-pdf * foomatic * hplip
Maybe even the following ones:
* libexif * openjpeg * libjpeg
I can’t remember where we would generate JPEG images, but I could be wrong on this. I don’t mind keeping them because they do not cause us a lot of work to maintain and they are not a security issue if we don’t use a lot of it.
-Michael
cdrom then completed without any issues but then right at the end of the build it comes up with the message "Checking for rootfile consistency and at the end says that the rootfiles are inconsistent but I can't figure out what the problem causing it actually is.
I have repeated the build three times with a reboot of my machine in between but that didn't help.
Would appreciate if anyone can help with what the issue is and what I need to go and fix.
The _build.preparation.log file only has the chroot: failed to run command 'env': No such file or directory.
There is not indication of which file or directory is missing. All the last entries shown in the log below are in the build and also in the rootfile.
Checking for rootfile consistency... /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/API.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/APIRef.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color/Float.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color/Table.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Cookbook.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/CountColor.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Draw.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Engines.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Expr.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Expr/Assem.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/ExtUtils.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/CUR.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/ICO.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/JPEG.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/PNG.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/SGI.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Files.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Fill.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/DynTest.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/Flines.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/Mandelbrot.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filters.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/BBox.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/FT2.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/FreeType2.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Image.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Test.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Truetype.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Type1.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Wrap.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Fountain.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Handy.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/IO.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/ImageTypes.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Inline.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Install.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/LargeSamples.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Matrix2d.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Preprocess.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Probe.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Regops.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Security.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Test.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Threads.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Transform.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Transformations.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Tutorial.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/interface.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/regmach.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/CountColor/CountColor.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/ICO/ICO.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/JPEG/JPEG.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/PNG/PNG.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/SGI/SGI.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/DynTest/DynTest.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/Flines/Flines.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/Mandelbrot/Mandelbrot.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Font/FT2/FT2.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Imager.so
chroot: failed to run command ‘env’: No such file or directoryERROR: Rootfiles are inconsistent [ FAIL ] Check /home/ipfire/sandbox/ipfire-2.x/log_x86_64/_build.preparation.log for errors if applicable [ FAIL ]
Regards,
Adolf.
Hi Michael,
On 10/10/2024 15:14, Michael Tremer wrote:
Hello,
On 10 Oct 2024, at 12:44, Adolf Belka adolf.belka@ipfire.org wrote:
Hi all,
I have run a build with all the obvious candidates related to printing removed.
libtiff removal caused a problem at cdrom stage with perl-Imager as the rootfile for that included some tiff libraries, which were then not present in the build.
So I ran without libtiff and then modified the perl-Imager rootfile to match the results in the Imager file in the Log directory.
I think the problem with the perl-Imager root file is that it contains “x86_64” which we scan for and then fail the build.
Ah, I was looking at the actual files and not the architecture bit. Missed that. The old build system used to actually say x86_64 architecture used. Replace with xxxMACHINExxx. Hopefully I will remember the next time I make that mistake.
We do need to keep perl-Imager though as we require it to generate the QR codes for OpenVPN.
I am not trying to get rid of perl-Imager. I recognised that it is required by OpenVPN for the QR codes. It was just removing the requirement to have the tiff capability in the perl-Imager rootfile.
What other packages did you drop?
I think we might be able to get rid of these:
- lcms2
Hadn't looked at that one.
- ghostscript
- qpdf
- poppler
- poppler-data
- cups-filters
- epson-inkjet-printer-escpr
- cups-pdf
- foomatic
- hplip
All above have been removed in the build.
Maybe even the following ones:
- libexif
- openjpeg
- libjpeg
libexif is a dependency for minidlna. Hadn't tried the other two.
Will get the existing set building successfully first then I will go back and add those two additional ones and see how things go with the build and then do an installation and see if the libtiff, poppler, poppler-data, openjpeg and libjpeg programs being removed cause any issues anywhere in the graphics used in IPFire.
Regards, Adolf.
I can’t remember where we would generate JPEG images, but I could be wrong on this. I don’t mind keeping them because they do not cause us a lot of work to maintain and they are not a security issue if we don’t use a lot of it.
-Michael
cdrom then completed without any issues but then right at the end of the build it comes up with the message "Checking for rootfile consistency and at the end says that the rootfiles are inconsistent but I can't figure out what the problem causing it actually is.
I have repeated the build three times with a reboot of my machine in between but that didn't help.
Would appreciate if anyone can help with what the issue is and what I need to go and fix.
The _build.preparation.log file only has the chroot: failed to run command 'env': No such file or directory.
There is not indication of which file or directory is missing. All the last entries shown in the log below are in the build and also in the rootfile.
Checking for rootfile consistency... /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/API.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/APIRef.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color/Float.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color/Table.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Cookbook.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/CountColor.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Draw.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Engines.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Expr.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Expr/Assem.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/ExtUtils.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/CUR.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/ICO.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/JPEG.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/PNG.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/SGI.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Files.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Fill.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/DynTest.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/Flines.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/Mandelbrot.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filters.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/BBox.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/FT2.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/FreeType2.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Image.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Test.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Truetype.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Type1.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Wrap.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Fountain.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Handy.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/IO.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/ImageTypes.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Inline.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Install.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/LargeSamples.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Matrix2d.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Preprocess.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Probe.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Regops.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Security.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Test.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Threads.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Transform.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Transformations.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Tutorial.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/interface.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/regmach.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/CountColor/CountColor.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/ICO/ICO.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/JPEG/JPEG.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/PNG/PNG.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/SGI/SGI.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/DynTest/DynTest.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/Flines/Flines.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/Mandelbrot/Mandelbrot.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Font/FT2/FT2.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Imager.so
chroot: failed to run command ‘env’: No such file or directoryERROR: Rootfiles are inconsistent [ FAIL ] Check /home/ipfire/sandbox/ipfire-2.x/log_x86_64/_build.preparation.log for errors if applicable [ FAIL ]
Regards,
Adolf.
Hello,
On 10 Oct 2024, at 15:32, Adolf Belka adolf.belka@ipfire.org wrote:
Hi Michael,
On 10/10/2024 15:14, Michael Tremer wrote:
Hello,
On 10 Oct 2024, at 12:44, Adolf Belka adolf.belka@ipfire.org wrote:
Hi all,
I have run a build with all the obvious candidates related to printing removed.
libtiff removal caused a problem at cdrom stage with perl-Imager as the rootfile for that included some tiff libraries, which were then not present in the build.
So I ran without libtiff and then modified the perl-Imager rootfile to match the results in the Imager file in the Log directory.
I think the problem with the perl-Imager root file is that it contains “x86_64” which we scan for and then fail the build.
Ah, I was looking at the actual files and not the architecture bit. Missed that. The old build system used to actually say x86_64 architecture used. Replace with xxxMACHINExxx. Hopefully I will remember the next time I make that mistake.
We do need to keep perl-Imager though as we require it to generate the QR codes for OpenVPN.
I am not trying to get rid of perl-Imager. I recognised that it is required by OpenVPN for the QR codes. It was just removing the requirement to have the tiff capability in the perl-Imager rootfile.
What other packages did you drop? I think we might be able to get rid of these:
- lcms2
Hadn't looked at that one.
I think we have a couple of image libraries, but we don’t use them that much any more. We generate SVG graphs now, there are some charts that should be PNG and there might be some stuff needed during build, but otherwise I don’t think we need to raster any images any more.
- ghostscript
- qpdf
- poppler
- poppler-data
- cups-filters
- epson-inkjet-printer-escpr
- cups-pdf
- foomatic
- hplip
All above have been removed in the build.
Nice.
Maybe even the following ones:
- libexif
- openjpeg
- libjpeg
libexif is a dependency for minidlna. Hadn't tried the other two.
I am not losing any sleep over keeping them.
Will get the existing set building successfully first then I will go back and add those two additional ones and see how things go with the build and then do an installation and see if the libtiff, poppler, poppler-data, openjpeg and libjpeg programs being removed cause any issues anywhere in the graphics used in IPFire.
Regards, Adolf.
I can’t remember where we would generate JPEG images, but I could be wrong on this. I don’t mind keeping them because they do not cause us a lot of work to maintain and they are not a security issue if we don’t use a lot of it. -Michael
cdrom then completed without any issues but then right at the end of the build it comes up with the message "Checking for rootfile consistency and at the end says that the rootfiles are inconsistent but I can't figure out what the problem causing it actually is.
I have repeated the build three times with a reboot of my machine in between but that didn't help.
Would appreciate if anyone can help with what the issue is and what I need to go and fix.
The _build.preparation.log file only has the chroot: failed to run command 'env': No such file or directory.
There is not indication of which file or directory is missing. All the last entries shown in the log below are in the build and also in the rootfile.
Checking for rootfile consistency... /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/API.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/APIRef.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color/Float.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color/Table.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Cookbook.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/CountColor.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Draw.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Engines.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Expr.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Expr/Assem.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/ExtUtils.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/CUR.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/ICO.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/JPEG.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/PNG.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/SGI.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Files.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Fill.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/DynTest.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/Flines.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/Mandelbrot.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filters.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/BBox.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/FT2.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/FreeType2.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Image.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Test.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Truetype.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Type1.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Wrap.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Fountain.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Handy.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/IO.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/ImageTypes.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Inline.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Install.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/LargeSamples.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Matrix2d.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Preprocess.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Probe.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Regops.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Security.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Test.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Threads.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Transform.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Transformations.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Tutorial.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/interface.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/regmach.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/CountColor/CountColor.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/ICO/ICO.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/JPEG/JPEG.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/PNG/PNG.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/SGI/SGI.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/DynTest/DynTest.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/Flines/Flines.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/Mandelbrot/Mandelbrot.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Font/FT2/FT2.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Imager.so
chroot: failed to run command ‘env’: No such file or directoryERROR: Rootfiles are inconsistent [ FAIL ] Check /home/ipfire/sandbox/ipfire-2.x/log_x86_64/_build.preparation.log for errors if applicable [ FAIL ]
Regards,
Adolf.
Hi Michael,
On 12/10/2024 11:25, Michael Tremer wrote:
Hello,
On 10 Oct 2024, at 15:32, Adolf Belka adolf.belka@ipfire.org wrote:
Hi Michael,
On 10/10/2024 15:14, Michael Tremer wrote:
Hello,
On 10 Oct 2024, at 12:44, Adolf Belka adolf.belka@ipfire.org wrote:
Hi all,
I have run a build with all the obvious candidates related to printing removed.
libtiff removal caused a problem at cdrom stage with perl-Imager as the rootfile for that included some tiff libraries, which were then not present in the build.
So I ran without libtiff and then modified the perl-Imager rootfile to match the results in the Imager file in the Log directory.
I think the problem with the perl-Imager root file is that it contains “x86_64” which we scan for and then fail the build.
Ah, I was looking at the actual files and not the architecture bit. Missed that. The old build system used to actually say x86_64 architecture used. Replace with xxxMACHINExxx. Hopefully I will remember the next time I make that mistake.
We do need to keep perl-Imager though as we require it to generate the QR codes for OpenVPN.
I am not trying to get rid of perl-Imager. I recognised that it is required by OpenVPN for the QR codes. It was just removing the requirement to have the tiff capability in the perl-Imager rootfile.
What other packages did you drop? I think we might be able to get rid of these:
- lcms2
Hadn't looked at that one.
I think we have a couple of image libraries, but we don’t use them that much any more. We generate SVG graphs now, there are some charts that should be PNG and there might be some stuff needed during build, but otherwise I don’t think we need to raster any images any more.
I missed adding lcms2 into my build yesterday. Will do it again also with that one removed.
- ghostscript
- qpdf
- poppler
- poppler-data
- cups-filters
- epson-inkjet-printer-escpr
- cups-pdf
- foomatic
- hplip
All above have been removed in the build.
Nice.
Maybe even the following ones:
- libexif
- openjpeg
- libjpeg
libexif is a dependency for minidlna. Hadn't tried the other two.
I am not losing any sleep over keeping them.
libjpeg is required for minidlna. So staying in. However it could be changed from a core program to an addon in the same way as libexif, becoming an install dependency for minidlna.
I will try that later.
Will get the existing set building successfully first then I will go back and add those two additional ones and see how things go with the build and then do an installation and see if the libtiff, poppler, poppler-data, openjpeg and libjpeg programs being removed cause any issues anywhere in the graphics used in IPFire.
So completed a build with libtiff, poppler, poppler-data and openjpeg core programs removed. No problems with the build.
Installed the build iso on a vm system and checked all the menu items that I could (around 98%).
All graphs/charts are working without any issues.
I will install the modified samba build and all the required dependencies except for any of the cups related ones and confirm again that everything still works okay and a file share can still be accessed.
If that works then I will go back and test the removal of the lcms2 and move the libjpeg to an addon and mark it as a dependency for minidlna.
Regards, Adolf.
Regards, Adolf.
I can’t remember where we would generate JPEG images, but I could be wrong on this. I don’t mind keeping them because they do not cause us a lot of work to maintain and they are not a security issue if we don’t use a lot of it. -Michael
cdrom then completed without any issues but then right at the end of the build it comes up with the message "Checking for rootfile consistency and at the end says that the rootfiles are inconsistent but I can't figure out what the problem causing it actually is.
I have repeated the build three times with a reboot of my machine in between but that didn't help.
Would appreciate if anyone can help with what the issue is and what I need to go and fix.
The _build.preparation.log file only has the chroot: failed to run command 'env': No such file or directory.
There is not indication of which file or directory is missing. All the last entries shown in the log below are in the build and also in the rootfile.
Checking for rootfile consistency... /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/API.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/APIRef.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color/Float.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color/Table.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Cookbook.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/CountColor.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Draw.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Engines.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Expr.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Expr/Assem.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/ExtUtils.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/CUR.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/ICO.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/JPEG.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/PNG.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/SGI.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Files.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Fill.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/DynTest.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/Flines.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/Mandelbrot.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filters.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/BBox.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/FT2.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/FreeType2.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Image.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Test.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Truetype.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Type1.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Wrap.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Fountain.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Handy.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/IO.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/ImageTypes.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Inline.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Install.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/LargeSamples.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Matrix2d.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Preprocess.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Probe.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Regops.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Security.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Test.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Threads.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Transform.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Transformations.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Tutorial.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/interface.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/regmach.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/CountColor/CountColor.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/ICO/ICO.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/JPEG/JPEG.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/PNG/PNG.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/SGI/SGI.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/DynTest/DynTest.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/Flines/Flines.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/Mandelbrot/Mandelbrot.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Font/FT2/FT2.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Imager.so
chroot: failed to run command ‘env’: No such file or directoryERROR: Rootfiles are inconsistent [ FAIL ] Check /home/ipfire/sandbox/ipfire-2.x/log_x86_64/_build.preparation.log for errors if applicable [ FAIL ]
Regards,
Adolf.
Hello,
On 12 Oct 2024, at 10:52, Adolf Belka adolf.belka@ipfire.org wrote:
Hi Michael,
On 12/10/2024 11:25, Michael Tremer wrote:
Hello,
On 10 Oct 2024, at 15:32, Adolf Belka adolf.belka@ipfire.org wrote:
Hi Michael,
On 10/10/2024 15:14, Michael Tremer wrote:
Hello,
On 10 Oct 2024, at 12:44, Adolf Belka adolf.belka@ipfire.org wrote:
Hi all,
I have run a build with all the obvious candidates related to printing removed.
libtiff removal caused a problem at cdrom stage with perl-Imager as the rootfile for that included some tiff libraries, which were then not present in the build.
So I ran without libtiff and then modified the perl-Imager rootfile to match the results in the Imager file in the Log directory.
I think the problem with the perl-Imager root file is that it contains “x86_64” which we scan for and then fail the build.
Ah, I was looking at the actual files and not the architecture bit. Missed that. The old build system used to actually say x86_64 architecture used. Replace with xxxMACHINExxx. Hopefully I will remember the next time I make that mistake.
We do need to keep perl-Imager though as we require it to generate the QR codes for OpenVPN.
I am not trying to get rid of perl-Imager. I recognised that it is required by OpenVPN for the QR codes. It was just removing the requirement to have the tiff capability in the perl-Imager rootfile.
What other packages did you drop? I think we might be able to get rid of these:
- lcms2
Hadn't looked at that one.
I think we have a couple of image libraries, but we don’t use them that much any more. We generate SVG graphs now, there are some charts that should be PNG and there might be some stuff needed during build, but otherwise I don’t think we need to raster any images any more.
I missed adding lcms2 into my build yesterday. Will do it again also with that one removed.
- ghostscript
- qpdf
- poppler
- poppler-data
- cups-filters
- epson-inkjet-printer-escpr
- cups-pdf
- foomatic
- hplip
All above have been removed in the build.
Nice.
Maybe even the following ones:
- libexif
- openjpeg
- libjpeg
libexif is a dependency for minidlna. Hadn't tried the other two.
I am not losing any sleep over keeping them.
libjpeg is required for minidlna. So staying in. However it could be changed from a core program to an addon in the same way as libexif, becoming an install dependency for minidlna.
I think I would prefer to have things in the core rather than too many add-ons.
I will try that later.
Will get the existing set building successfully first then I will go back and add those two additional ones and see how things go with the build and then do an installation and see if the libtiff, poppler, poppler-data, openjpeg and libjpeg programs being removed cause any issues anywhere in the graphics used in IPFire.
So completed a build with libtiff, poppler, poppler-data and openjpeg core programs removed. No problems with the build.
Installed the build iso on a vm system and checked all the menu items that I could (around 98%).
All graphs/charts are working without any issues.
I will install the modified samba build and all the required dependencies except for any of the cups related ones and confirm again that everything still works okay and a file share can still be accessed.
If that works then I will go back and test the removal of the lcms2 and move the libjpeg to an addon and mark it as a dependency for minidlna.
Please just leave libjpeg in the core system as it is then.
Regards, Adolf.
Regards, Adolf.
I can’t remember where we would generate JPEG images, but I could be wrong on this. I don’t mind keeping them because they do not cause us a lot of work to maintain and they are not a security issue if we don’t use a lot of it. -Michael
cdrom then completed without any issues but then right at the end of the build it comes up with the message "Checking for rootfile consistency and at the end says that the rootfiles are inconsistent but I can't figure out what the problem causing it actually is.
I have repeated the build three times with a reboot of my machine in between but that didn't help.
Would appreciate if anyone can help with what the issue is and what I need to go and fix.
The _build.preparation.log file only has the chroot: failed to run command 'env': No such file or directory.
There is not indication of which file or directory is missing. All the last entries shown in the log below are in the build and also in the rootfile.
Checking for rootfile consistency... /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/API.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/APIRef.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color/Float.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color/Table.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Cookbook.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/CountColor.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Draw.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Engines.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Expr.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Expr/Assem.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/ExtUtils.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/CUR.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/ICO.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/JPEG.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/PNG.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/SGI.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Files.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Fill.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/DynTest.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/Flines.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/Mandelbrot.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filters.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/BBox.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/FT2.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/FreeType2.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Image.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Test.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Truetype.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Type1.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Wrap.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Fountain.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Handy.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/IO.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/ImageTypes.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Inline.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Install.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/LargeSamples.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Matrix2d.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Preprocess.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Probe.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Regops.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Security.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Test.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Threads.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Transform.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Transformations.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Tutorial.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/interface.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/regmach.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/CountColor/CountColor.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/ICO/ICO.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/JPEG/JPEG.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/PNG/PNG.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/SGI/SGI.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/DynTest/DynTest.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/Flines/Flines.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/Mandelbrot/Mandelbrot.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Font/FT2/FT2.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Imager.so
chroot: failed to run command ‘env’: No such file or directoryERROR: Rootfiles are inconsistent [ FAIL ] Check /home/ipfire/sandbox/ipfire-2.x/log_x86_64/_build.preparation.log for errors if applicable [ FAIL ]
Regards,
Adolf.
-- Sent from my laptop
Hi Michael & all,
On 12/10/2024 11:54, Michael Tremer wrote:
Hello,
On 12 Oct 2024, at 10:52, Adolf Belka adolf.belka@ipfire.org wrote:
Hi Michael,
On 12/10/2024 11:25, Michael Tremer wrote:
Hello,
On 10 Oct 2024, at 15:32, Adolf Belka adolf.belka@ipfire.org wrote:
Hi Michael,
On 10/10/2024 15:14, Michael Tremer wrote:
Hello,
On 10 Oct 2024, at 12:44, Adolf Belka adolf.belka@ipfire.org wrote:
Hi all,
I have run a build with all the obvious candidates related to printing removed.
libtiff removal caused a problem at cdrom stage with perl-Imager as the rootfile for that included some tiff libraries, which were then not present in the build.
So I ran without libtiff and then modified the perl-Imager rootfile to match the results in the Imager file in the Log directory.
I think the problem with the perl-Imager root file is that it contains “x86_64” which we scan for and then fail the build.
Ah, I was looking at the actual files and not the architecture bit. Missed that. The old build system used to actually say x86_64 architecture used. Replace with xxxMACHINExxx. Hopefully I will remember the next time I make that mistake.
We do need to keep perl-Imager though as we require it to generate the QR codes for OpenVPN.
I am not trying to get rid of perl-Imager. I recognised that it is required by OpenVPN for the QR codes. It was just removing the requirement to have the tiff capability in the perl-Imager rootfile.
What other packages did you drop? I think we might be able to get rid of these:
- lcms2
Hadn't looked at that one.
I think we have a couple of image libraries, but we don’t use them that much any more. We generate SVG graphs now, there are some charts that should be PNG and there might be some stuff needed during build, but otherwise I don’t think we need to raster any images any more.
I missed adding lcms2 into my build yesterday. Will do it again also with that one removed.
- ghostscript
- qpdf
- poppler
- poppler-data
- cups-filters
- epson-inkjet-printer-escpr
- cups-pdf
- foomatic
- hplip
All above have been removed in the build.
Nice.
Maybe even the following ones:
- libexif
- openjpeg
- libjpeg
libexif is a dependency for minidlna. Hadn't tried the other two.
I am not losing any sleep over keeping them.
libjpeg is required for minidlna. So staying in. However it could be changed from a core program to an addon in the same way as libexif, becoming an install dependency for minidlna.
I think I would prefer to have things in the core rather than too many add-ons.
I will try that later.
Will get the existing set building successfully first then I will go back and add those two additional ones and see how things go with the build and then do an installation and see if the libtiff, poppler, poppler-data, openjpeg and libjpeg programs being removed cause any issues anywhere in the graphics used in IPFire.
So completed a build with libtiff, poppler, poppler-data and openjpeg core programs removed. No problems with the build.
Installed the build iso on a vm system and checked all the menu items that I could (around 98%).
All graphs/charts are working without any issues.
I will install the modified samba build and all the required dependencies except for any of the cups related ones and confirm again that everything still works okay and a file share can still be accessed.
If that works then I will go back and test the removal of the lcms2 and move the libjpeg to an addon and mark it as a dependency for minidlna.
Please just leave libjpeg in the core system as it is then.
Left libjpeg as it was.
Removed lcms2 and together with all the others it built without any problems.
Installed the built iso on a vm and checked all menu entries that I could. everything with a chart of graph etc worked as normal.
I also installed the modified version of samba with only the following dependencies:- avahi perl-Parse-Yapp perl-JSON wsdd
The samba cgi page worked as normal and an existing share was able to be connected to. I was also able to create a new share and also connect to that with no problems.
I will now submit a patch set for the result so it can be reviewed and considered.
Regards, Adolf.
Regards, Adolf.
Regards, Adolf.
I can’t remember where we would generate JPEG images, but I could be wrong on this. I don’t mind keeping them because they do not cause us a lot of work to maintain and they are not a security issue if we don’t use a lot of it. -Michael
cdrom then completed without any issues but then right at the end of the build it comes up with the message "Checking for rootfile consistency and at the end says that the rootfiles are inconsistent but I can't figure out what the problem causing it actually is.
I have repeated the build three times with a reboot of my machine in between but that didn't help.
Would appreciate if anyone can help with what the issue is and what I need to go and fix.
The _build.preparation.log file only has the chroot: failed to run command 'env': No such file or directory.
There is not indication of which file or directory is missing. All the last entries shown in the log below are in the build and also in the rootfile.
Checking for rootfile consistency... /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/API.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/APIRef.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color/Float.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Color/Table.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Cookbook.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/CountColor.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Draw.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Engines.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Expr.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Expr/Assem.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/ExtUtils.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/CUR.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/ICO.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/JPEG.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/PNG.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/File/SGI.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Files.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Fill.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/DynTest.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/Flines.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filter/Mandelbrot.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Filters.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/BBox.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/FT2.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/FreeType2.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Image.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Test.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Truetype.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Type1.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Font/Wrap.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Fountain.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Handy.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/IO.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/ImageTypes.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Inline.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Install.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/LargeSamples.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Matrix2d.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Preprocess.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Probe.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Regops.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Security.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Test.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Threads.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Transform.pm /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Transformations.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/Tutorial.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/interface.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/Imager/regmach.pod /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/CountColor/CountColor.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/ICO/ICO.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/JPEG/JPEG.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/PNG/PNG.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/File/SGI/SGI.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/DynTest/DynTest.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/Flines/Flines.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Filter/Mandelbrot/Mandelbrot.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Font/FT2/FT2.so /home/ipfire/sandbox/ipfire-2.x/config/rootfiles/common/perl-Imager:usr/lib/perl5/site_perl/5.36.0/x86_64-linux-thread-multi/auto/Imager/Imager.so
chroot: failed to run command ‘env’: No such file or directoryERROR: Rootfiles are inconsistent [ FAIL ] Check /home/ipfire/sandbox/ipfire-2.x/log_x86_64/_build.preparation.log for errors if applicable [ FAIL ]
Regards,
Adolf.
-- Sent from my laptop
-
Adolf Belka -
Michael Tremer