Can't find libid3tag when updating mpd - Development

8 Apr 2021


      Hi All,
I am trying to update mpd. They no longer use autotools but now use meson. I updated the lfs file to use meson with the same options that were previously run with autotools.
When the build gets to the id3tag it fails to find it. I is earlier in the build sequence and would also have been needed for the previous autotools version.
The log I get is attached below followed by the lfs file I am using.
If I remove the id3tag line then everything else in mpd builds successfully. If I run ./make.sh shell and extract the source into /tmp and then do the meson build I get the same result. I tried pkg-config --modversion libid3tag and it came back blank so pkg-config couldn't find it.
If I extract the file in my desktop system and run the meson build it successfully completes also for the id3tag. libid3tag is installed on my arch linux desktop system.
It seems like the build is failing to find the IPFire libid3tag library file successfully. Is there some additional entry of flag that I need to set for the libid3tag files to be found?
--------------------------------------------------------------------------
Apr  5 19:58:59: Building mpd mpd-0.22.6.tar.xz checksum OK
+ cd /usr/src/lfs
+ make -f mpd LFS_BASEDIR=/usr/src install
====================================== Installing mpd-0.22.6 ...
Install started; saving file list to /usr/src/lsalr ...
cd /usr/src/mpd-0.22.6 && meson    --prefix=/usr         \
             --sysconfdir=/etc    \
             --libdir=/usr/lib    \
             -D ipv6=disabled     \
             -D sqlite=disabled    \
             -D smbclient=disabled    \
             -D id3tag=enabled    \
             -D vorbis=enabled    \
             -D expat=enabled    \
             -D ffmpeg=enabled    \
             -D flac=enabled        \
             -D lame=enabled        \
             -D upnp=enabled        \
             -D icu=disabled        \
             builddir/
The Meson build system
Version: 0.56.0
Source dir: /usr/src/mpd-0.22.6
Build dir: /usr/src/mpd-0.22.6/builddir
Build type: native build
WARNING: Unknown options: "c_std, cpp_std"
The value of new options can be set with:
meson setup <builddir> --reconfigure -Dnew_option=new_value ...
Project name: mpd
Project version: 0.22.6
Using 'CFLAGS' from environment with value: '-O2 -pipe -Wall -fexceptions -fPIC -m64 -mtune=generic -fstack-clash-protection -fcf-protection -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fstack-protector-strong'
C compiler for the host machine: ccache cc (gcc 10.2.0 "cc (GCC) 10.2.0")
C linker for the host machine: cc ld.bfd 2.35.1
Using 'CXXFLAGS' from environment with value: '-O2 -pipe -Wall -fexceptions -fPIC -m64 -mtune=generic -fstack-clash-protection -fcf-protection -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fstack-protector-strong'
C++ compiler for the host machine: ccache c++ (gcc 10.2.0 "c++ (GCC) 10.2.0")
C++ linker for the host machine: c++ ld.bfd 2.35.1
Using 'CFLAGS' from environment with value: '-O2 -pipe -Wall -fexceptions -fPIC -m64 -mtune=generic -fstack-clash-protection -fcf-protection -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fstack-protector-strong'
Using 'CXXFLAGS' from environment with value: '-O2 -pipe -Wall -fexceptions -fPIC -m64 -mtune=generic -fstack-clash-protection -fcf-protection -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fstack-protector-strong'
Host machine cpu family: x86_64
Host machine cpu: x86_64
Configuring Version.h using configuration
Compiler for C++ supports arguments -Wvla: YES
Compiler for C++ supports arguments -Wdouble-promotion: YES
Compiler for C++ supports arguments -fvisibility=hidden: YES
Compiler for C++ supports arguments -ffast-math: YES
Compiler for C++ supports arguments -ftree-vectorize: YES
Compiler for C++ supports arguments -fno-threadsafe-statics: YES
Compiler for C++ supports arguments -fmerge-all-constants: YES
Compiler for C++ supports arguments -Wmissing-declarations: YES
Compiler for C++ supports arguments -Wshadow: YES
Compiler for C++ supports arguments -Wpointer-arith: YES
Compiler for C++ supports arguments -Wcast-qual: YES
Compiler for C++ supports arguments -Wwrite-strings: YES
Compiler for C++ supports arguments -Wsign-compare: YES
Compiler for C++ supports arguments -Wcomma: NO
Compiler for C++ supports arguments -Wextra-semi: YES
Compiler for C++ supports arguments -Wheader-hygiene: NO
Compiler for C++ supports arguments -Winconsistent-missing-destructor-override: NO
Compiler for C++ supports arguments -Wunreachable-code-break: NO
Compiler for C++ supports arguments -Wunused: YES
Compiler for C++ supports arguments -Wused-but-marked-unused: NO
Compiler for C++ supports arguments -Wno-non-virtual-dtor: YES
Compiler for C supports arguments -Wvla: YES
Compiler for C supports arguments -Wdouble-promotion: YES
Compiler for C supports arguments -fvisibility=hidden: YES
Compiler for C supports arguments -ffast-math: YES
Compiler for C supports arguments -ftree-vectorize: YES
Compiler for C supports arguments -Wmissing-prototypes: YES
Compiler for C supports arguments -Wshadow: YES
Compiler for C supports arguments -Wpointer-arith: YES
Compiler for C supports arguments -Wstrict-prototypes: YES
Compiler for C supports arguments -Wcast-qual: YES
Compiler for C supports arguments -Wwrite-strings: YES
Compiler for C supports arguments -pedantic: YES
Compiler for C++ supports link arguments -Wl,-z,relro: YES
Compiler for C++ supports link arguments -Wl,-z,now: YES
Checking for function "getpwnam_r" : YES
Checking for function "getpwuid_r" : YES
Checking for function "initgroups" : YES
Checking for function "fnmatch" : YES
Checking for function "strndup" : YES
Checking for function "strcasestr" : YES
Checking for function "syslog" : YES
Found pkg-config: /usr/bin/pkg-config (0.29.2)
Run-time dependency Boost found: YES 1.71.0 (/usr)
Found CMake: /usr/bin/cmake (3.18.3)
Run-time dependency liburing found: NO (tried pkgconfig and cmake)
Configuring Features.h using configuration
Run-time dependency threads found: YES
Checking for function "pthread_setname_np" with dependency threads: YES
Header <sys/socket.h> has symbol "struct ucred" : YES
Header <sys/socket.h> has symbol "SO_PEERCRED" : YES
Checking for function "getpeereid" : NO
Run-time dependency dbus-1 found: YES 1.12.20
Dependency icu-i18n skipped: feature icu disabled
Checking for function "iconv" : YES
Dependency smbclient skipped: feature smbclient disabled
Run-time dependency zlib found: YES 1.2.11
Run-time dependency alsa found: YES 1.0.27.1
Run-time dependency libchromaprint found: NO (tried pkgconfig and cmake)
Run-time dependency libcurl found: YES 7.75.0
Run-time dependency expat found: YES 2.2.0
Run-time dependency libavformat found: YES 58.29.100
Run-time dependency libavcodec found: YES 58.54.100
Run-time dependency libavutil found: YES 56.31.100
Run-time dependency libavfilter found: YES 7.57.100
Run-time dependency libnfs found: NO (tried pkgconfig and cmake)
Run-time dependency libpcre found: YES 8.44
Run-time dependency libpulse found: NO (tried pkgconfig and cmake)
Library sndio found: NO
Dependency sqlite3 skipped: feature sqlite disabled
Run-time dependency libsystemd found: NO (tried pkgconfig and cmake)
Run-time dependency libupnp found: YES 1.14.3
Run-time dependency yajl found: NO (tried pkgconfig and cmake)
Run-time dependency id3tag found: NO (tried pkgconfig and cmake)
src/tag/meson.build:40:0: ERROR: Dependency "id3tag" not found, tried pkgconfig and cmake
A full log can be found at /usr/src/mpd-0.22.6/builddir/meson-logs/meson-log.txt
make: *** [mpd:81: /usr/src/log/mpd-0.22.6] Error 1
--------------------------------------------------------------------------
###############################################################################
# #
# IPFire.org - A linux based firewall                                         #
# Copyright (C) 2007-2018  IPFire Team info@ipfire.org                     #
# #
# This program is free software: you can redistribute it and/or modify        #
# it under the terms of the GNU General Public License as published by        #
# the Free Software Foundation, either version 3 of the License, or           #
# (at your option) any later version.                                         #
# #
# This program is distributed in the hope that it will be useful,             #
# but WITHOUT ANY WARRANTY; without even the implied warranty of              #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the               #
# GNU General Public License for more details.                                #
# #
# You should have received a copy of the GNU General Public License           #
# along with this program.  If not, see http://www.gnu.org/licenses/.       #
# #
###############################################################################
###############################################################################
# Definitions
###############################################################################
include Config
VER        = 0.22.6
THISAPP    = mpd-$(VER)
DL_FILE    = $(THISAPP).tar.xz
DL_FROM    = $(URL_IPFIRE)
DIR_APP    = $(DIR_SRC)/${THISAPP}
TARGET     = $(DIR_INFO)/$(THISAPP)
PROG       = mpd
PAK_VER    = 21
DEPS       = alsa avahi faad2 ffmpeg flac lame libmad libshout libogg libid3tag libvorbis opus soxr
###############################################################################
# Top-level Rules
###############################################################################
objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
$(DL_FILE)_MD5 = 774a6250870730f3d55eb1445ab751dd
install : $(TARGET)
check : $(patsubst %,$(DIR_CHK)/%,$(objects))
download :$(patsubst %,$(DIR_DL)/%,$(objects))
md5 : $(subst %,%_MD5,$(objects))
dist:
     @$(PAK)
###############################################################################
# Downloading, checking, md5sum
###############################################################################
$(patsubst %,$(DIR_CHK)/%,$(objects)) :
     @$(CHECK)
$(patsubst %,$(DIR_DL)/%,$(objects)) :
     @$(LOAD)
$(subst %,%_MD5,$(objects)) :
     @$(MD5)
###############################################################################
# Installation Details
###############################################################################
$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
     @$(PREBUILD)
     @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
     $(UPDATE_AUTOMAKE)
     cd $(DIR_APP) && meson    --prefix=/usr         \
                 --sysconfdir=/etc    \
                 --libdir=/usr/lib    \
                 -D ipv6=disabled     \
                 -D sqlite=disabled    \
                 -D smbclient=disabled    \
                 -D id3tag=enabled    \
                 -D vorbis=enabled    \
                 -D expat=enabled    \
                 -D ffmpeg=enabled    \
                 -D flac=enabled        \
                 -D lame=enabled        \
                 -D upnp=enabled        \
                 -D icu=disabled        \
                 builddir/
     cd $(DIR_APP) && ninja -C builddir/
     cd $(DIR_APP) && ninja -C builddir/ install
#install initscripts
     $(call INSTALL_INITSCRIPT,mpd)
@rm -rf $(DIR_APP)
     touch /var/log/mpd.error.log
     touch /var/log/mpd.log
     @$(POSTBUILD)