- crda only works with python2 version of m2crypto python-m2crypto requires python-setuptools and python-typing - With Linux kernel 4.15 and later the country code status check that crda did is built into the kernel. - So from kernel 4.15, crda can be removed, which allows removal of m2crypto, setuptools and typing. - python-typing is built into python3 so no additional python3 module required. - python3 version of python-setuptools has already been installed. - python3 version of python-m2crypto is not required. python-m2crypto is only used for the build of crda. - ipaddr can be removed as the function of this python2 module is built into python3 with ipaddress.py - removal of crda tested with 5.10.45 kernel and the setting of a country code was recognised. If this test carried out with crda removed and 4.14.232 kernel then country code stays defined as the global code "00". - wlanap.cgi uses regdbdump from crda to create a text based list of the wireless settings by country database. With the removal of crda a modification is required to wireless-reg to copy the db.txt file to a specific location that wlan.cgi can then access. db.txt is the text file version of the wireless settings by country database. - This series version copies the db.txt file and renames it regulatorydb.txt and places it in /lib/firmware/ - This series version also corrects the loading command from regulatorydb.txt into the @countrylist_cmd variable
Signed-off-by: Adolf Belka adolf.belka@ipfire.org --- make.sh | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/make.sh b/make.sh index d78fb2ff0..57b83e432 100755 --- a/make.sh +++ b/make.sh @@ -25,7 +25,7 @@ NAME="IPFire" # Software name SNAME="ipfire" # Short name # If you update the version don't forget to update backupiso and add it to core update -VERSION="2.27" # Version number +VERSION="2.25" # Version number CORE="159" # Core Level (Filename) SLOGAN="www.ipfire.org" # Software slogan CONFIG_ROOT=/var/ipfire # Configuration rootdir @@ -1296,7 +1296,6 @@ buildipfire() { lfsmake2 whatmask lfsmake2 libtirpc lfsmake2 conntrack-tools - lfsmake2 ipaddr lfsmake2 iputils lfsmake2 l7-protocols lfsmake2 hwdata @@ -1333,7 +1332,6 @@ buildipfire() { lfsmake2 XML-Parser lfsmake2 Crypt-PasswdMD5 lfsmake2 Net-Telnet - lfsmake2 python-setuptools lfsmake2 python3-setuptools lfsmake2 python3-inotify lfsmake2 python3-docutils @@ -1517,10 +1515,7 @@ buildipfire() { lfsmake2 swig lfsmake2 u-boot lfsmake2 u-boot-friendlyarm - lfsmake2 python-typing - lfsmake2 python-m2crypto lfsmake2 wireless-regdb - lfsmake2 crda lfsmake2 libsolv lfsmake2 ddns lfsmake2 python3-setuptools-scm
- From kernel 4.15 and onwards the function of what crda does is built into the kernel. - Tested the removal of crda with kernel 4.14.232 and kernel 5.10.45 Country code set by "iw reg set NL" was recognised with kernel 5.10.45 and set at the global value of 00 with kernel 4.14.232 confirming the kernel built in option is working without the prescence of crda
Tested-by: Adolf Belka adolf.belka@ipfire.org Signed-off-by: Adolf Belka adolf.belka@ipfire.org --- config/rootfiles/common/crda | 14 ------- lfs/crda | 78 ------------------------------------ 2 files changed, 92 deletions(-) delete mode 100644 config/rootfiles/common/crda delete mode 100644 lfs/crda
diff --git a/config/rootfiles/common/crda b/config/rootfiles/common/crda deleted file mode 100644 index 5f93bc254..000000000 --- a/config/rootfiles/common/crda +++ /dev/null @@ -1,14 +0,0 @@ -lib/udev/rules.d/85-regulatory.rules -#root/.python-eggs -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto/__m2crypto.so -sbin/crda -sbin/regdbdump -#usr/include/reglib -#usr/include/reglib/nl80211.h -#usr/include/reglib/regdb.h -#usr/include/reglib/reglib.h -usr/lib/libreg.so -#usr/share/man/man8/crda.8.gz -#usr/share/man/man8/regdbdump.8.gz diff --git a/lfs/crda b/lfs/crda deleted file mode 100644 index bd812942e..000000000 --- a/lfs/crda +++ /dev/null @@ -1,78 +0,0 @@ -############################################################################### -# # -# IPFire.org - A linux based firewall # -# Copyright (C) 2007-2018 IPFire Team info@ipfire.org # -# # -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the GNU General Public License as published by # -# the Free Software Foundation, either version 3 of the License, or # -# (at your option) any later version. # -# # -# This program is distributed in the hope that it will be useful, # -# but WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # -# GNU General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see http://www.gnu.org/licenses/. # -# # -############################################################################### - -############################################################################### -# Definitions -############################################################################### - -include Config - -VER = 4.14 - -THISAPP = crda-$(VER) -DL_FILE = $(THISAPP).tar.gz -DL_FROM = $(URL_IPFIRE) -DIR_APP = $(DIR_SRC)/$(THISAPP) - -TARGET = $(DIR_INFO)/$(THISAPP) - -############################################################################### -# Top-level Rules -############################################################################### - -objects = $(DL_FILE) - -$(DL_FILE) = $(DL_FROM)/$(DL_FILE) - -$(DL_FILE)_MD5 = cac7ba8de3e2e6aa46918e0c76df7d67 - -install : $(TARGET) - -check : $(patsubst %,$(DIR_CHK)/%,$(objects)) - -download :$(patsubst %,$(DIR_DL)/%,$(objects)) - -md5 : $(subst %,%_MD5,$(objects)) - -############################################################################### -# Downloading, checking, md5sum -############################################################################### - -$(patsubst %,$(DIR_CHK)/%,$(objects)) : - @$(CHECK) - -$(patsubst %,$(DIR_DL)/%,$(objects)) : - @$(LOAD) - -$(subst %,%_MD5,$(objects)) : - @$(MD5) - -############################################################################### -# Installation Details -############################################################################### - -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) - @$(PREBUILD) - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE) - cd $(DIR_APP) && sed -e "s/-Werror//g" -i Makefile - cd $(DIR_APP) && make $(MAKETUNING) - cd $(DIR_APP) && make install - @rm -rf $(DIR_APP) - @$(POSTBUILD)
- A python3 version of this module is not required as python-m2crypto is only used for the build of crda.
Signed-off-by: Adolf Belka adolf.belka@ipfire.org --- config/rootfiles/common/python-m2crypto | 98 ------------------------- lfs/python-m2crypto | 83 --------------------- 2 files changed, 181 deletions(-) delete mode 100644 config/rootfiles/common/python-m2crypto delete mode 100644 lfs/python-m2crypto
diff --git a/config/rootfiles/common/python-m2crypto b/config/rootfiles/common/python-m2crypto deleted file mode 100644 index c5477cda3..000000000 --- a/config/rootfiles/common/python-m2crypto +++ /dev/null @@ -1,98 +0,0 @@ -#usr/lib/python2.7/site-packages/M2Crypto -#usr/lib/python2.7/site-packages/M2Crypto-0.27.0-py2.7.egg-info -#usr/lib/python2.7/site-packages/M2Crypto-0.27.0-py2.7.egg-info/PKG-INFO -#usr/lib/python2.7/site-packages/M2Crypto-0.27.0-py2.7.egg-info/SOURCES.txt -#usr/lib/python2.7/site-packages/M2Crypto-0.27.0-py2.7.egg-info/dependency_links.txt -#usr/lib/python2.7/site-packages/M2Crypto-0.27.0-py2.7.egg-info/requires.txt -#usr/lib/python2.7/site-packages/M2Crypto-0.27.0-py2.7.egg-info/top_level.txt -#usr/lib/python2.7/site-packages/M2Crypto/ASN1.py -#usr/lib/python2.7/site-packages/M2Crypto/ASN1.pyc -#usr/lib/python2.7/site-packages/M2Crypto/AuthCookie.py -#usr/lib/python2.7/site-packages/M2Crypto/AuthCookie.pyc -#usr/lib/python2.7/site-packages/M2Crypto/BIO.py -#usr/lib/python2.7/site-packages/M2Crypto/BIO.pyc -#usr/lib/python2.7/site-packages/M2Crypto/BN.py -#usr/lib/python2.7/site-packages/M2Crypto/BN.pyc -#usr/lib/python2.7/site-packages/M2Crypto/DH.py -#usr/lib/python2.7/site-packages/M2Crypto/DH.pyc -#usr/lib/python2.7/site-packages/M2Crypto/DSA.py -#usr/lib/python2.7/site-packages/M2Crypto/DSA.pyc -#usr/lib/python2.7/site-packages/M2Crypto/EC.py -#usr/lib/python2.7/site-packages/M2Crypto/EC.pyc -#usr/lib/python2.7/site-packages/M2Crypto/EVP.py -#usr/lib/python2.7/site-packages/M2Crypto/EVP.pyc -#usr/lib/python2.7/site-packages/M2Crypto/Engine.py -#usr/lib/python2.7/site-packages/M2Crypto/Engine.pyc -#usr/lib/python2.7/site-packages/M2Crypto/Err.py -#usr/lib/python2.7/site-packages/M2Crypto/Err.pyc -#usr/lib/python2.7/site-packages/M2Crypto/PGP -#usr/lib/python2.7/site-packages/M2Crypto/PGP/PublicKey.py -#usr/lib/python2.7/site-packages/M2Crypto/PGP/PublicKey.pyc -#usr/lib/python2.7/site-packages/M2Crypto/PGP/PublicKeyRing.py -#usr/lib/python2.7/site-packages/M2Crypto/PGP/PublicKeyRing.pyc -#usr/lib/python2.7/site-packages/M2Crypto/PGP/RSA.py -#usr/lib/python2.7/site-packages/M2Crypto/PGP/RSA.pyc -#usr/lib/python2.7/site-packages/M2Crypto/PGP/__init__.py -#usr/lib/python2.7/site-packages/M2Crypto/PGP/__init__.pyc -#usr/lib/python2.7/site-packages/M2Crypto/PGP/constants.py -#usr/lib/python2.7/site-packages/M2Crypto/PGP/constants.pyc -#usr/lib/python2.7/site-packages/M2Crypto/PGP/packet.py -#usr/lib/python2.7/site-packages/M2Crypto/PGP/packet.pyc -#usr/lib/python2.7/site-packages/M2Crypto/RC4.py -#usr/lib/python2.7/site-packages/M2Crypto/RC4.pyc -#usr/lib/python2.7/site-packages/M2Crypto/RSA.py -#usr/lib/python2.7/site-packages/M2Crypto/RSA.pyc -#usr/lib/python2.7/site-packages/M2Crypto/Rand.py -#usr/lib/python2.7/site-packages/M2Crypto/Rand.pyc -#usr/lib/python2.7/site-packages/M2Crypto/SMIME.py -#usr/lib/python2.7/site-packages/M2Crypto/SMIME.pyc -#usr/lib/python2.7/site-packages/M2Crypto/SSL -#usr/lib/python2.7/site-packages/M2Crypto/SSL/Checker.py -#usr/lib/python2.7/site-packages/M2Crypto/SSL/Checker.pyc -#usr/lib/python2.7/site-packages/M2Crypto/SSL/Cipher.py -#usr/lib/python2.7/site-packages/M2Crypto/SSL/Cipher.pyc -#usr/lib/python2.7/site-packages/M2Crypto/SSL/Connection.py -#usr/lib/python2.7/site-packages/M2Crypto/SSL/Connection.pyc -#usr/lib/python2.7/site-packages/M2Crypto/SSL/Context.py -#usr/lib/python2.7/site-packages/M2Crypto/SSL/Context.pyc -#usr/lib/python2.7/site-packages/M2Crypto/SSL/SSLServer.py -#usr/lib/python2.7/site-packages/M2Crypto/SSL/SSLServer.pyc -#usr/lib/python2.7/site-packages/M2Crypto/SSL/Session.py -#usr/lib/python2.7/site-packages/M2Crypto/SSL/Session.pyc -#usr/lib/python2.7/site-packages/M2Crypto/SSL/TwistedProtocolWrapper.py -#usr/lib/python2.7/site-packages/M2Crypto/SSL/TwistedProtocolWrapper.pyc -#usr/lib/python2.7/site-packages/M2Crypto/SSL/__init__.py -#usr/lib/python2.7/site-packages/M2Crypto/SSL/__init__.pyc -#usr/lib/python2.7/site-packages/M2Crypto/SSL/cb.py -#usr/lib/python2.7/site-packages/M2Crypto/SSL/cb.pyc -#usr/lib/python2.7/site-packages/M2Crypto/SSL/ssl_dispatcher.py -#usr/lib/python2.7/site-packages/M2Crypto/SSL/ssl_dispatcher.pyc -#usr/lib/python2.7/site-packages/M2Crypto/SSL/timeout.py -#usr/lib/python2.7/site-packages/M2Crypto/SSL/timeout.pyc -#usr/lib/python2.7/site-packages/M2Crypto/X509.py -#usr/lib/python2.7/site-packages/M2Crypto/X509.pyc -#usr/lib/python2.7/site-packages/M2Crypto/__init__.py -#usr/lib/python2.7/site-packages/M2Crypto/__init__.pyc -#usr/lib/python2.7/site-packages/M2Crypto/_m2crypto.so -#usr/lib/python2.7/site-packages/M2Crypto/callback.py -#usr/lib/python2.7/site-packages/M2Crypto/callback.pyc -#usr/lib/python2.7/site-packages/M2Crypto/ftpslib.py -#usr/lib/python2.7/site-packages/M2Crypto/ftpslib.pyc -#usr/lib/python2.7/site-packages/M2Crypto/httpslib.py -#usr/lib/python2.7/site-packages/M2Crypto/httpslib.pyc -#usr/lib/python2.7/site-packages/M2Crypto/m2.py -#usr/lib/python2.7/site-packages/M2Crypto/m2.pyc -#usr/lib/python2.7/site-packages/M2Crypto/m2crypto.py -#usr/lib/python2.7/site-packages/M2Crypto/m2crypto.pyc -#usr/lib/python2.7/site-packages/M2Crypto/m2urllib.py -#usr/lib/python2.7/site-packages/M2Crypto/m2urllib.pyc -#usr/lib/python2.7/site-packages/M2Crypto/m2urllib2.py -#usr/lib/python2.7/site-packages/M2Crypto/m2urllib2.pyc -#usr/lib/python2.7/site-packages/M2Crypto/m2xmlrpclib.py -#usr/lib/python2.7/site-packages/M2Crypto/m2xmlrpclib.pyc -#usr/lib/python2.7/site-packages/M2Crypto/six.py -#usr/lib/python2.7/site-packages/M2Crypto/six.pyc -#usr/lib/python2.7/site-packages/M2Crypto/threading.py -#usr/lib/python2.7/site-packages/M2Crypto/threading.pyc -#usr/lib/python2.7/site-packages/M2Crypto/util.py -#usr/lib/python2.7/site-packages/M2Crypto/util.pyc diff --git a/lfs/python-m2crypto b/lfs/python-m2crypto deleted file mode 100644 index de004bfd9..000000000 --- a/lfs/python-m2crypto +++ /dev/null @@ -1,83 +0,0 @@ -############################################################################### -# # -# IPFire.org - A linux based firewall # -# Copyright (C) 2007-2018 IPFire Team info@ipfire.org # -# # -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the GNU General Public License as published by # -# the Free Software Foundation, either version 3 of the License, or # -# (at your option) any later version. # -# # -# This program is distributed in the hope that it will be useful, # -# but WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # -# GNU General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see http://www.gnu.org/licenses/. # -# # -############################################################################### - -############################################################################### -# Definitions -############################################################################### - -include Config - -VER = 0.27.0 - -THISAPP = M2Crypto-$(VER) -DL_FILE = $(THISAPP).tar.gz -DL_FROM = $(URL_IPFIRE) -DIR_APP = $(DIR_SRC)/$(THISAPP) -TARGET = $(DIR_INFO)/$(THISAPP) -#PROG = python-m2crypto -#PAK_VER = 1 - -#DEPS = - -############################################################################### -# Top-level Rules -############################################################################### - -objects = $(DL_FILE) - -$(DL_FILE) = $(DL_FROM)/$(DL_FILE) - -$(DL_FILE)_MD5 = 4477bd6b2835560c73982476dba5e515 - -install : $(TARGET) - -check : $(patsubst %,$(DIR_CHK)/%,$(objects)) - -download :$(patsubst %,$(DIR_DL)/%,$(objects)) - -md5 : $(subst %,%_MD5,$(objects)) - -#dist: -# @$(PAK) - -############################################################################### -# Downloading, checking, md5sum -############################################################################### - -$(patsubst %,$(DIR_CHK)/%,$(objects)) : - @$(CHECK) - -$(patsubst %,$(DIR_DL)/%,$(objects)) : - @$(LOAD) - -$(subst %,%_MD5,$(objects)) : - @$(MD5) - -############################################################################### -# Installation Details -############################################################################### - -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) - @$(PREBUILD) - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) - cd $(DIR_APP) && python setup.py build - cd $(DIR_APP) && python setup.py install --root=/ - @rm -rf $(DIR_APP) - @$(POSTBUILD)
- With the removal of python-m2crypto then python-typing is no longer rerquired as a dependency. - The functionality of the python2 typing module is built in to python3.
Signed-off-by: Adolf Belka adolf.belka@ipfire.org --- config/rootfiles/common/python-typing | 3 - lfs/python-typing | 79 --------------------------- 2 files changed, 82 deletions(-) delete mode 100644 config/rootfiles/common/python-typing delete mode 100644 lfs/python-typing
diff --git a/config/rootfiles/common/python-typing b/config/rootfiles/common/python-typing deleted file mode 100644 index 519796ca4..000000000 --- a/config/rootfiles/common/python-typing +++ /dev/null @@ -1,3 +0,0 @@ -#usr/lib/python2.7/site-packages/typing-3.6.1-py2.7.egg-info -#usr/lib/python2.7/site-packages/typing.py -#usr/lib/python2.7/site-packages/typing.pyc diff --git a/lfs/python-typing b/lfs/python-typing deleted file mode 100644 index d7bbe412b..000000000 --- a/lfs/python-typing +++ /dev/null @@ -1,79 +0,0 @@ -############################################################################### -# # -# IPFire.org - A linux based firewall # -# Copyright (C) 2007-2018 IPFire Team info@ipfire.org # -# # -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the GNU General Public License as published by # -# the Free Software Foundation, either version 3 of the License, or # -# (at your option) any later version. # -# # -# This program is distributed in the hope that it will be useful, # -# but WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # -# GNU General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see http://www.gnu.org/licenses/. # -# # -############################################################################### - -############################################################################### -# Definitions -############################################################################### - -include Config - -VER = 3.6.1 - -THISAPP = typing-$(VER) -DL_FILE = $(THISAPP).tar.gz -DL_FROM = $(URL_IPFIRE) -DIR_APP = $(DIR_SRC)/$(THISAPP) -TARGET = $(DIR_INFO)/$(THISAPP) - -############################################################################### -# Top-level Rules -############################################################################### - -objects = $(DL_FILE) - -$(DL_FILE) = $(DL_FROM)/$(DL_FILE) - -$(DL_FILE)_MD5 = 3fec97415bae6f742fb3c3013dedeb89 - -install : $(TARGET) - -check : $(patsubst %,$(DIR_CHK)/%,$(objects)) - -download :$(patsubst %,$(DIR_DL)/%,$(objects)) - -md5 : $(subst %,%_MD5,$(objects)) - -#dist: -# @$(PAK) - -############################################################################### -# Downloading, checking, md5sum -############################################################################### - -$(patsubst %,$(DIR_CHK)/%,$(objects)) : - @$(CHECK) - -$(patsubst %,$(DIR_DL)/%,$(objects)) : - @$(LOAD) - -$(subst %,%_MD5,$(objects)) : - @$(MD5) - -############################################################################### -# Installation Details -############################################################################### - -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) - @$(PREBUILD) - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) - cd $(DIR_APP) && python setup.py build - cd $(DIR_APP) && python setup.py install --skip-build - @rm -rf $(DIR_APP) - @$(POSTBUILD)
- With the removal of python-m2crypto then this module is not longer required as a dependency. - python3-setuptools was already released into Core Update 157
Signed-off-by: Adolf Belka adolf.belka@ipfire.org --- config/rootfiles/common/python-setuptools | 5 -- lfs/python-setuptools | 80 ----------------------- 2 files changed, 85 deletions(-) delete mode 100644 config/rootfiles/common/python-setuptools delete mode 100644 lfs/python-setuptools
diff --git a/config/rootfiles/common/python-setuptools b/config/rootfiles/common/python-setuptools deleted file mode 100644 index 15b22ac39..000000000 --- a/config/rootfiles/common/python-setuptools +++ /dev/null @@ -1,5 +0,0 @@ -#usr/bin/easy_install -#usr/bin/easy_install-2.7 -#usr/lib/python2.7/site-packages/easy-install.pth -#usr/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg -#usr/lib/python2.7/site-packages/setuptools.pth diff --git a/lfs/python-setuptools b/lfs/python-setuptools deleted file mode 100644 index 1ffcfca18..000000000 --- a/lfs/python-setuptools +++ /dev/null @@ -1,80 +0,0 @@ -############################################################################### -# # -# IPFire.org - A linux based firewall # -# Copyright (C) 2007-2018 IPFire Team info@ipfire.org # -# # -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the GNU General Public License as published by # -# the Free Software Foundation, either version 3 of the License, or # -# (at your option) any later version. # -# # -# This program is distributed in the hope that it will be useful, # -# but WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # -# GNU General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see http://www.gnu.org/licenses/. # -# # -############################################################################### - -############################################################################### -# Definitions -############################################################################### - -include Config - -VER = 0.6c11 - -THISAPP = setuptools-$(VER) -DL_FILE = $(THISAPP)-py2.7.egg -DL_FROM = $(URL_IPFIRE) -DIR_APP = $(DIR_SRC)/$(THISAPP) -TARGET = $(DIR_INFO)/$(THISAPP) -PROG = python-setuptools -PAK_VER = 2 - -DEPS = - -############################################################################### -# Top-level Rules -############################################################################### - -objects = $(DL_FILE) - -$(DL_FILE) = $(DL_FROM)/$(DL_FILE) - -$(DL_FILE)_MD5 = fe1f997bc722265116870bc7919059ea - -install : $(TARGET) - -check : $(patsubst %,$(DIR_CHK)/%,$(objects)) - -download :$(patsubst %,$(DIR_DL)/%,$(objects)) - -md5 : $(subst %,%_MD5,$(objects)) - -dist: - @$(PAK) - -############################################################################### -# Downloading, checking, md5sum -############################################################################### - -$(patsubst %,$(DIR_CHK)/%,$(objects)) : - @$(CHECK) - -$(patsubst %,$(DIR_DL)/%,$(objects)) : - @$(LOAD) - -$(subst %,%_MD5,$(objects)) : - @$(MD5) - -############################################################################### -# Installation Details -############################################################################### - -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) - @$(PREBUILD) - bash $(DIR_DL)/$(DL_FILE) - @$(POSTBUILD)
- python3 has this functionality built in with ipaddress.py
Signed-off-by: Adolf Belka adolf.belka@ipfire.org --- config/rootfiles/common/ipaddr | 2 - lfs/ipaddr | 76 ---------------------------------- 2 files changed, 78 deletions(-) delete mode 100644 config/rootfiles/common/ipaddr delete mode 100644 lfs/ipaddr
diff --git a/config/rootfiles/common/ipaddr b/config/rootfiles/common/ipaddr deleted file mode 100644 index 17998ccc2..000000000 --- a/config/rootfiles/common/ipaddr +++ /dev/null @@ -1,2 +0,0 @@ -#usr/lib/python2.7/ipaddr.py -usr/lib/python2.7/ipaddr.pyc diff --git a/lfs/ipaddr b/lfs/ipaddr deleted file mode 100644 index d5d28229b..000000000 --- a/lfs/ipaddr +++ /dev/null @@ -1,76 +0,0 @@ -############################################################################### -# # -# IPFire.org - A linux based firewall # -# Copyright (C) 2007-2018 IPFire Team info@ipfire.org # -# # -# This program is free software: you can redistribute it and/or modify # -# it under the terms of the GNU General Public License as published by # -# the Free Software Foundation, either version 3 of the License, or # -# (at your option) any later version. # -# # -# This program is distributed in the hope that it will be useful, # -# but WITHOUT ANY WARRANTY; without even the implied warranty of # -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # -# GNU General Public License for more details. # -# # -# You should have received a copy of the GNU General Public License # -# along with this program. If not, see http://www.gnu.org/licenses/. # -# # -############################################################################### - -############################################################################### -# Definitions -############################################################################### - -include Config - -VER = 1.2 - -THISAPP = ipaddr-$(VER) -DL_FILE = $(THISAPP).tar.gz -DL_FROM = $(URL_IPFIRE) -DIR_APP = $(DIR_SRC)/$(THISAPP) -TARGET = $(DIR_INFO)/$(THISAPP) - -############################################################################### -# Top-level Rules -############################################################################### - -objects = $(DL_FILE) - -$(DL_FILE) = $(DL_FROM)/$(DL_FILE) - -$(DL_FILE)_MD5 = 239a3725a3dd6a1d1e369b75144e617e - -install : $(TARGET) - -check : $(patsubst %,$(DIR_CHK)/%,$(objects)) - -download :$(patsubst %,$(DIR_DL)/%,$(objects)) - -md5 : $(subst %,%_MD5,$(objects)) - -############################################################################### -# Downloading, checking, md5sum -############################################################################### - -$(patsubst %,$(DIR_CHK)/%,$(objects)) : - @$(CHECK) - -$(patsubst %,$(DIR_DL)/%,$(objects)) : - @$(LOAD) - -$(subst %,%_MD5,$(objects)) : - @$(MD5) - -############################################################################### -# Installation Details -############################################################################### - -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) - @$(PREBUILD) - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) - cd $(DIR_APP) && install -m 0644 ipaddr.py /usr/lib/python2* - /usr/bin/python -c "import ipaddr" - @rm -rf $(DIR_APP) - @$(POSTBUILD)
- db.txt is the text file version of the wireless settings by country database - Using db.txt means that regdbdump from crda is not required by wlanap.cgi - This patch copies the db.txt file from the source tarball to /lib/firmware/ where it can be read by wlanap.cgi - This version of the patch renames the db.txt file to regulatorydb.txt - Updated rootfile to include regulatorydb.txt
Signed-off-by: Adolf Belka adolf.belka@ipfire.org --- config/rootfiles/common/wireless-regdb | 1 + lfs/wireless-regdb | 1 + 2 files changed, 2 insertions(+)
diff --git a/config/rootfiles/common/wireless-regdb b/config/rootfiles/common/wireless-regdb index 7e830ae1f..12376c6e7 100644 --- a/config/rootfiles/common/wireless-regdb +++ b/config/rootfiles/common/wireless-regdb @@ -1,3 +1,4 @@ +lib/firmware/regulatorydb.txt lib/firmware/regulatory.db lib/firmware/regulatory.db.p7s #usr/lib/crda diff --git a/lfs/wireless-regdb b/lfs/wireless-regdb index 6cffd34ba..8b89795ae 100644 --- a/lfs/wireless-regdb +++ b/lfs/wireless-regdb @@ -72,5 +72,6 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) @$(PREBUILD) @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE) cd $(DIR_APP) && make install + cp -vf $(DIR_APP)/db.txt /lib/firmware/regulatorydb.txt @rm -rf $(DIR_APP) @$(POSTBUILD)
Reviewed-by: Bernhard Bitsch bbitsch@ipfire.org
Am 05.08.2021 um 23:01 schrieb Adolf Belka:
- db.txt is the text file version of the wireless settings by country database
- Using db.txt means that regdbdump from crda is not required by wlanap.cgi
- This patch copies the db.txt file from the source tarball to /lib/firmware/ where it can be read by wlanap.cgi
- This version of the patch renames the db.txt file to regulatorydb.txt
- Updated rootfile to include regulatorydb.txt
Signed-off-by: Adolf Belka adolf.belka@ipfire.org
config/rootfiles/common/wireless-regdb | 1 + lfs/wireless-regdb | 1 + 2 files changed, 2 insertions(+)
diff --git a/config/rootfiles/common/wireless-regdb b/config/rootfiles/common/wireless-regdb index 7e830ae1f..12376c6e7 100644 --- a/config/rootfiles/common/wireless-regdb +++ b/config/rootfiles/common/wireless-regdb @@ -1,3 +1,4 @@ +lib/firmware/regulatorydb.txt lib/firmware/regulatory.db lib/firmware/regulatory.db.p7s #usr/lib/crda diff --git a/lfs/wireless-regdb b/lfs/wireless-regdb index 6cffd34ba..8b89795ae 100644 --- a/lfs/wireless-regdb +++ b/lfs/wireless-regdb @@ -72,5 +72,6 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) @$(PREBUILD) @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE) cd $(DIR_APP) && make install
- cp -vf $(DIR_APP)/db.txt /lib/firmware/regulatorydb.txt @rm -rf $(DIR_APP) @$(POSTBUILD)
- wlanap.cgi was using regdbdump from crda to create a text based list of the wireless settings by country database. - With the removal of crda as part of the removal of python2 this option could not be used. - wireless-regdb also has a text based database list in the source tarball and this patch makes wlanap.cgi read this list into the @countrylist_cmd variable - This needs to be tested by someone that has an IPFire system with wifi that can access and evaluate wlanap.cgi to confirm that this change functions as expected. - This version changes the name of the stored text file from db.txt to regulatorydb.txt - The command to read the data from regulatorydb.txt into @countrylist_cmd has been corrected
Signed-off-by: Adolf Belka adolf.belka@ipfire.org --- html/cgi-bin/wlanap.cgi | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/html/cgi-bin/wlanap.cgi b/html/cgi-bin/wlanap.cgi index eba5fe774..5eb34d651 100644 --- a/html/cgi-bin/wlanap.cgi +++ b/html/cgi-bin/wlanap.cgi @@ -312,8 +312,11 @@ if ( $channel =~ /\d+/ ){push(@temp,$channel + 0);} push(@channellist, @temp); }
-my @countrylist_cmd = `regdbdump /usr/lib/crda/regulatory.bin 2>/dev/null`; # get available country codes +open(FILE, “</lib/firmware/regulatorydb.txt”); +my @countrylist_cmd = <FILE>; +close(FILE); +
my @temp = "00"; foreach (@countrylist_cmd){
Reviewed-by: Bernhard Bitsch bbitsch@ipfire.org
Am 05.08.2021 um 23:01 schrieb Adolf Belka:
- wlanap.cgi was using regdbdump from crda to create a text based list of the wireless settings by country database.
- With the removal of crda as part of the removal of python2 this option could not be used.
- wireless-regdb also has a text based database list in the source tarball and this patch makes wlanap.cgi read this list into the @countrylist_cmd variable
- This needs to be tested by someone that has an IPFire system with wifi that can access and evaluate wlanap.cgi to confirm that this change functions as expected.
- This version changes the name of the stored text file from db.txt to regulatorydb.txt
- The command to read the data from regulatorydb.txt into @countrylist_cmd has been corrected
Signed-off-by: Adolf Belka adolf.belka@ipfire.org
html/cgi-bin/wlanap.cgi | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/html/cgi-bin/wlanap.cgi b/html/cgi-bin/wlanap.cgi index eba5fe774..5eb34d651 100644 --- a/html/cgi-bin/wlanap.cgi +++ b/html/cgi-bin/wlanap.cgi @@ -312,8 +312,11 @@ if ( $channel =~ /\d+/ ){push(@temp,$channel + 0);} push(@channellist, @temp); }
-my @countrylist_cmd = `regdbdump /usr/lib/crda/regulatory.bin 2>/dev/null`; # get available country codes +open(FILE, “</lib/firmware/regulatorydb.txt”); +my @countrylist_cmd = <FILE>; +close(FILE);
my @temp = "00"; foreach (@countrylist_cmd){
Sorry for late review but this patch alter the IPFire version back to 2.25. Should i fix this at merge or want you send a new version ?
Arne
Am 2021-08-05 23:01, schrieb Adolf Belka:
- crda only works with python2 version of m2crypto python-m2crypto requires python-setuptools and python-typing
- With Linux kernel 4.15 and later the country code status check that
crda did is built into the kernel.
- So from kernel 4.15, crda can be removed, which allows removal of
m2crypto, setuptools and typing.
- python-typing is built into python3 so no additional python3 module
required.
- python3 version of python-setuptools has already been installed.
- python3 version of python-m2crypto is not required. python-m2crypto
is only used for the build of crda.
- ipaddr can be removed as the function of this python2 module is
built into python3 with ipaddress.py
- removal of crda tested with 5.10.45 kernel and the setting of a
country code was recognised. If this test carried out with crda removed and 4.14.232 kernel then country code stays defined as the global code "00".
- wlanap.cgi uses regdbdump from crda to create a text based list of
the wireless settings by country database. With the removal of crda a modification is required to wireless-reg to copy the db.txt file to a specific location that wlan.cgi can then access. db.txt is the text file version of the wireless settings by country database.
- This series version copies the db.txt file and renames it
regulatorydb.txt and places it in /lib/firmware/
- This series version also corrects the loading command from
regulatorydb.txt into the @countrylist_cmd variable
Signed-off-by: Adolf Belka adolf.belka@ipfire.org
make.sh | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/make.sh b/make.sh index d78fb2ff0..57b83e432 100755 --- a/make.sh +++ b/make.sh @@ -25,7 +25,7 @@ NAME="IPFire" # Software name SNAME="ipfire" # Short name # If you update the version don't forget to update backupiso and add it to core update -VERSION="2.27" # Version number +VERSION="2.25" # Version number CORE="159" # Core Level (Filename) SLOGAN="www.ipfire.org" # Software slogan CONFIG_ROOT=/var/ipfire # Configuration rootdir @@ -1296,7 +1296,6 @@ buildipfire() { lfsmake2 whatmask lfsmake2 libtirpc lfsmake2 conntrack-tools
- lfsmake2 ipaddr lfsmake2 iputils lfsmake2 l7-protocols lfsmake2 hwdata
@@ -1333,7 +1332,6 @@ buildipfire() { lfsmake2 XML-Parser lfsmake2 Crypt-PasswdMD5 lfsmake2 Net-Telnet
- lfsmake2 python-setuptools lfsmake2 python3-setuptools lfsmake2 python3-inotify lfsmake2 python3-docutils
@@ -1517,10 +1515,7 @@ buildipfire() { lfsmake2 swig lfsmake2 u-boot lfsmake2 u-boot-friendlyarm
- lfsmake2 python-typing
- lfsmake2 python-m2crypto lfsmake2 wireless-regdb
- lfsmake2 crda lfsmake2 libsolv lfsmake2 ddns lfsmake2 python3-setuptools-scm
Hi Arne,
You can just merge this, then edit make.sh and change the commit using “git commit —-amend”.
That is probably the easiest.
-Michael
On 6 Sep 2021, at 11:47, Arne Fitzenreiter arne_f@ipfire.org wrote:
Sorry for late review but this patch alter the IPFire version back to 2.25. Should i fix this at merge or want you send a new version ?
Arne
Am 2021-08-05 23:01, schrieb Adolf Belka:
- crda only works with python2 version of m2crypto python-m2crypto requires python-setuptools and python-typing
- With Linux kernel 4.15 and later the country code status check that
crda did is built into the kernel.
- So from kernel 4.15, crda can be removed, which allows removal of
m2crypto, setuptools and typing.
- python-typing is built into python3 so no additional python3 module required.
- python3 version of python-setuptools has already been installed.
- python3 version of python-m2crypto is not required. python-m2crypto
is only used for the build of crda.
- ipaddr can be removed as the function of this python2 module is
built into python3 with ipaddress.py
- removal of crda tested with 5.10.45 kernel and the setting of a
country code was recognised. If this test carried out with crda removed and 4.14.232 kernel then country code stays defined as the global code "00".
- wlanap.cgi uses regdbdump from crda to create a text based list of the wireless settings by country database. With the removal of crda a
modification is required to wireless-reg to copy the db.txt file to a specific location that wlan.cgi can then access. db.txt is the text file version of the wireless settings by country database.
- This series version copies the db.txt file and renames it
regulatorydb.txt and places it in /lib/firmware/
- This series version also corrects the loading command from
regulatorydb.txt into the @countrylist_cmd variable Signed-off-by: Adolf Belka adolf.belka@ipfire.org
make.sh | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/make.sh b/make.sh index d78fb2ff0..57b83e432 100755 --- a/make.sh +++ b/make.sh @@ -25,7 +25,7 @@ NAME="IPFire" # Software name SNAME="ipfire" # Short name # If you update the version don't forget to update backupiso and add it to core update -VERSION="2.27" # Version number +VERSION="2.25" # Version number CORE="159" # Core Level (Filename) SLOGAN="www.ipfire.org" # Software slogan CONFIG_ROOT=/var/ipfire # Configuration rootdir @@ -1296,7 +1296,6 @@ buildipfire() { lfsmake2 whatmask lfsmake2 libtirpc lfsmake2 conntrack-tools
- lfsmake2 ipaddr lfsmake2 iputils lfsmake2 l7-protocols lfsmake2 hwdata
@@ -1333,7 +1332,6 @@ buildipfire() { lfsmake2 XML-Parser lfsmake2 Crypt-PasswdMD5 lfsmake2 Net-Telnet
- lfsmake2 python-setuptools lfsmake2 python3-setuptools lfsmake2 python3-inotify lfsmake2 python3-docutils
@@ -1517,10 +1515,7 @@ buildipfire() { lfsmake2 swig lfsmake2 u-boot lfsmake2 u-boot-friendlyarm
- lfsmake2 python-typing
- lfsmake2 python-m2crypto lfsmake2 wireless-regdb
- lfsmake2 crda lfsmake2 libsolv lfsmake2 ddns lfsmake2 python3-setuptools-scm
-
Adolf Belka -
Arne Fitzenreiter -
Bernhard Bitsch -
Michael Tremer