For details see: http://www.squid-cache.org/Versions/v5/changesets/
Signed-off-by: Matthias Fischer matthias.fischer@ipfire.org --- lfs/squid | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/lfs/squid b/lfs/squid index c56dca7de..5e9648aba 100644 --- a/lfs/squid +++ b/lfs/squid @@ -24,7 +24,7 @@
include Config
-VER = 5.1 +VER = 5.2
THISAPP = squid-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -46,7 +46,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = 17be9709b54fe0146452113404be7b54 +$(DL_FILE)_MD5 = 102984f3ea382a1fa5bd917c2ee155ec
install : $(TARGET)
Reviewed-by: Adolf Belka adolf.belka@ipfire.org
On 08/10/2021 19:19, Matthias Fischer wrote:
For details see: http://www.squid-cache.org/Versions/v5/changesets/
Signed-off-by: Matthias Fischer matthias.fischer@ipfire.org
lfs/squid | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/lfs/squid b/lfs/squid index c56dca7de..5e9648aba 100644 --- a/lfs/squid +++ b/lfs/squid @@ -24,7 +24,7 @@
include Config
-VER = 5.1 +VER = 5.2
THISAPP = squid-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -46,7 +46,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = 17be9709b54fe0146452113404be7b54 +$(DL_FILE)_MD5 = 102984f3ea382a1fa5bd917c2ee155ec
install : $(TARGET)
Hey,
Are we ready to got to squid 5, yet?
I thought there were some remaining changes required in the CGI file?
-Michael
On 8 Oct 2021, at 18:19, Matthias Fischer matthias.fischer@ipfire.org wrote:
For details see: http://www.squid-cache.org/Versions/v5/changesets/
Signed-off-by: Matthias Fischer matthias.fischer@ipfire.org
lfs/squid | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/lfs/squid b/lfs/squid index c56dca7de..5e9648aba 100644 --- a/lfs/squid +++ b/lfs/squid @@ -24,7 +24,7 @@
include Config
-VER = 5.1 +VER = 5.2
THISAPP = squid-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -46,7 +46,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = 17be9709b54fe0146452113404be7b54 +$(DL_FILE)_MD5 = 102984f3ea382a1fa5bd917c2ee155ec
install : $(TARGET)
-- 2.18.0
Hi,
On 09.10.2021 14:06, Michael Tremer wrote:
Hey,
Are we ready to got to squid 5, yet?
Up and running here, but...
I thought there were some remaining changes required in the CGI file?
...the question is whether we adopt the new maximum of 32k filedescriptors as a fixed setting and remove the corresponding adjustment field or leave the user the possibility to influence these settings via GUI.
I'm testing here with '16384' and didn't see any problem with that. If it is desired I can of course remove the setting, I just didn't see the need so far.
-Michael
On 8 Oct 2021, at 18:19, Matthias Fischer matthias.fischer@ipfire.org wrote:
For details see: http://www.squid-cache.org/Versions/v5/changesets/
Signed-off-by: Matthias Fischer matthias.fischer@ipfire.org
lfs/squid | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/lfs/squid b/lfs/squid index c56dca7de..5e9648aba 100644 --- a/lfs/squid +++ b/lfs/squid @@ -24,7 +24,7 @@
include Config
-VER = 5.1 +VER = 5.2
THISAPP = squid-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -46,7 +46,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = 17be9709b54fe0146452113404be7b54 +$(DL_FILE)_MD5 = 102984f3ea382a1fa5bd917c2ee155ec
install : $(TARGET)
-- 2.18.0
Hello,
I would say that 16k should be fine. 32k would be even better.
It probably only becomes a problem on a very busy proxy with a lot of open (but idle) connections.
-Michael
On 9 Oct 2021, at 13:46, Matthias Fischer matthias.fischer@ipfire.org wrote:
Hi,
On 09.10.2021 14:06, Michael Tremer wrote:
Hey,
Are we ready to got to squid 5, yet?
Up and running here, but...
I thought there were some remaining changes required in the CGI file?
...the question is whether we adopt the new maximum of 32k filedescriptors as a fixed setting and remove the corresponding adjustment field or leave the user the possibility to influence these settings via GUI.
I'm testing here with '16384' and didn't see any problem with that. If it is desired I can of course remove the setting, I just didn't see the need so far.
-Michael
On 8 Oct 2021, at 18:19, Matthias Fischer matthias.fischer@ipfire.org wrote:
For details see: http://www.squid-cache.org/Versions/v5/changesets/
Signed-off-by: Matthias Fischer matthias.fischer@ipfire.org
lfs/squid | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/lfs/squid b/lfs/squid index c56dca7de..5e9648aba 100644 --- a/lfs/squid +++ b/lfs/squid @@ -24,7 +24,7 @@
include Config
-VER = 5.1 +VER = 5.2
THISAPP = squid-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -46,7 +46,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = 17be9709b54fe0146452113404be7b54 +$(DL_FILE)_MD5 = 102984f3ea382a1fa5bd917c2ee155ec
install : $(TARGET)
-- 2.18.0
Hi,
On 09.10.2021 14:47, Michael Tremer wrote:
Hello,
I would say that 16k should be fine. 32k would be even better.
It probably only becomes a problem on a very busy proxy with a lot of open (but idle) connections.
This leaves me in the state "Remove or not?" ;-)
My two cents: Let the user decide and leave this setting as it is...
Opinions?
Matthias
-Michael
On 9 Oct 2021, at 13:46, Matthias Fischer matthias.fischer@ipfire.org wrote:
Hi,
On 09.10.2021 14:06, Michael Tremer wrote:
Hey,
Are we ready to got to squid 5, yet?
Up and running here, but...
I thought there were some remaining changes required in the CGI file?
...the question is whether we adopt the new maximum of 32k filedescriptors as a fixed setting and remove the corresponding adjustment field or leave the user the possibility to influence these settings via GUI.
I'm testing here with '16384' and didn't see any problem with that. If it is desired I can of course remove the setting, I just didn't see the need so far.
-Michael
On 8 Oct 2021, at 18:19, Matthias Fischer matthias.fischer@ipfire.org wrote:
For details see: http://www.squid-cache.org/Versions/v5/changesets/
Signed-off-by: Matthias Fischer matthias.fischer@ipfire.org
lfs/squid | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/lfs/squid b/lfs/squid index c56dca7de..5e9648aba 100644 --- a/lfs/squid +++ b/lfs/squid @@ -24,7 +24,7 @@
include Config
-VER = 5.1 +VER = 5.2
THISAPP = squid-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -46,7 +46,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = 17be9709b54fe0146452113404be7b54 +$(DL_FILE)_MD5 = 102984f3ea382a1fa5bd917c2ee155ec
install : $(TARGET)
-- 2.18.0
Hello,
On 9 Oct 2021, at 14:00, Matthias Fischer matthias.fischer@ipfire.org wrote:
Hi,
On 09.10.2021 14:47, Michael Tremer wrote:
Hello,
I would say that 16k should be fine. 32k would be even better.
It probably only becomes a problem on a very busy proxy with a lot of open (but idle) connections.
This leaves me in the state "Remove or not?" ;-)
My two cents: Let the user decide and leave this setting as it is...
My metric always is: If we don’t know, how does the user?
The only thing we don’t know is how many connections the user is expecting. But we know the technical details.
Let’s do it 32k and if that isn’t enough someone will open a bug report.
-Michael
Opinions?
Matthias
-Michael
On 9 Oct 2021, at 13:46, Matthias Fischer matthias.fischer@ipfire.org wrote:
Hi,
On 09.10.2021 14:06, Michael Tremer wrote:
Hey,
Are we ready to got to squid 5, yet?
Up and running here, but...
I thought there were some remaining changes required in the CGI file?
...the question is whether we adopt the new maximum of 32k filedescriptors as a fixed setting and remove the corresponding adjustment field or leave the user the possibility to influence these settings via GUI.
I'm testing here with '16384' and didn't see any problem with that. If it is desired I can of course remove the setting, I just didn't see the need so far.
-Michael
On 8 Oct 2021, at 18:19, Matthias Fischer matthias.fischer@ipfire.org wrote:
For details see: http://www.squid-cache.org/Versions/v5/changesets/
Signed-off-by: Matthias Fischer matthias.fischer@ipfire.org
lfs/squid | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/lfs/squid b/lfs/squid index c56dca7de..5e9648aba 100644 --- a/lfs/squid +++ b/lfs/squid @@ -24,7 +24,7 @@
include Config
-VER = 5.1 +VER = 5.2
THISAPP = squid-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -46,7 +46,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = 17be9709b54fe0146452113404be7b54 +$(DL_FILE)_MD5 = 102984f3ea382a1fa5bd917c2ee155ec
install : $(TARGET)
-- 2.18.0
-
Adolf Belka -
Matthias Fischer -
Michael Tremer