Hello Michael,

thanks for your reply.

Yes, I missed those indeed. They say intelligent life before the days' first coffee is possible in theory, however completely illusionary in the real world. :-/

Thanks, and best regards, Peter Müller

This patch is lacking the changes to the root files.

I will take care of this.

-Michael

...

On 18 May 2021, at 20:58, Peter Müller peter.mueller@ipfire.org wrote:

This patch requires https://patchwork.ipfire.org/project/ipfire/list/?series=2059 to be applied in the first place.

Signed-off-by: Peter Müller peter.mueller@ipfire.org

config/miniupnpd/miniupnpd.conf | 50 ------------------- .../networking/red.down/10-miniupnpd | 6 --- .../networking/red.up/10-miniupnpd | 6 --- 3 files changed, 62 deletions(-) delete mode 100644 config/miniupnpd/miniupnpd.conf delete mode 100644 src/initscripts/networking/red.down/10-miniupnpd delete mode 100644 src/initscripts/networking/red.up/10-miniupnpd

diff --git a/config/miniupnpd/miniupnpd.conf b/config/miniupnpd/miniupnpd.conf deleted file mode 100644 index 582758192..000000000 --- a/config/miniupnpd/miniupnpd.conf +++ /dev/null @@ -1,50 +0,0 @@

-# LAN network interfaces IPs / networks -# there can be multiple listening ips for SSDP traffic. -# should be under the form nnn.nnn.nnn.nnn/nn -listening_ip=green0 -#listening_ip=green1

-# HTTP is available on all interfaces -# port for HTTP (descriptions and SOAP) traffic. set 0 for autoselect. -port=0

-# chain names for netfilter (not used for pf or ipf). -upnp_forward_chain=UPNPFW -upnp_nat_chain=UPNPFW

-# bitrates reported by daemon in bits per second -bitrate_up=1000000 -bitrate_down=10000000

-# "secure" mode : when enabled, UPnP client are allowed to add mappings only -# to their IP. -secure_mode=yes

-# report system uptime instead of daemon uptime -system_uptime=yes

-# notify interval in seconds. default is 30 seconds. -notify_interval=60

-# unused rules cleaning. -# never remove any rule before this threshold for the number -# of redirections is exceeded. default to 20 -#clean_ruleset_threshold=10 -# clean process work interval in seconds. default to 0 (disabled). -# a 600 seconds (10 minutes) interval makes sense -clean_ruleset_interval=600

-# serial and model number the daemon will report to clients -# in its XML description -serial=12345678 -model_number=1

-# UPnP permission rules -# (allow|deny) (external port range) ip/mask (internal port range) -# A port range is <min port>-<max port> or <port> if there is only -# one port in the range. -# ip/mask format must be nn.nn.nn.nn/nn -# it is advised to only allow redirection of port above 1024 -# and to finish the rule set with "deny 0-65535 0.0.0.0/0 0-65535" -allow 0-65535 0.0.0.0/0 0-65535 diff --git a/src/initscripts/networking/red.down/10-miniupnpd b/src/initscripts/networking/red.down/10-miniupnpd deleted file mode 100644 index eaf2239e9..000000000 --- a/src/initscripts/networking/red.down/10-miniupnpd +++ /dev/null @@ -1,6 +0,0 @@ -#!/bin/bash

-[ -x /etc/init.d/miniupnpd ] && \

• /etc/init.d/miniupnpd stop &>/dev/null

-exit 0 diff --git a/src/initscripts/networking/red.up/10-miniupnpd b/src/initscripts/networking/red.up/10-miniupnpd deleted file mode 100644 index 54431331b..000000000 --- a/src/initscripts/networking/red.up/10-miniupnpd +++ /dev/null @@ -1,6 +0,0 @@ -#!/bin/bash

-[ -x /etc/init.d/miniupnpd ] && \

• /etc/init.d/miniupnpd start &>/dev/null

-exit 0

2.26.2