pyload

Daniel Weismüller whytea at ipfire.org
Thu Jul 25 08:27:06 CEST 2013


Oh ok. 
So we need someone other who may do the necessary changes.

Is here a volunteer who could made this for us? ;)

- Daniel

Am Mittwoch, den 24.07.2013, 19:45 +0200 schrieb Thomas Ebert:
> Hi Daniel,
> 
> sorry i don't think so.
> 
> Regards Thomas
> 
> Am 24.07.2013 15:14, schrieb Daniel Weismüller:
> > Hi Thomas
> > do you think you're able to implement the new suggestions from Michael?
> >
> > - Daniel
> >
> >
> > Am Donnerstag, den 04.07.2013, 12:51 +0200 schrieb Michael Tremer:
> >> Hi Thomas,
> >>
> >> two things about this:
> >>
> >> a) The rootfile is (again) completely messed up. The build system will
> >> complain at the end that it could not compare it to what has been
> >> generated in the build.
> >>
> >> b) The initscript does not seem very well done. Despite that some
> >> information has not been properly filled out in the header and in the
> >> lines that will be prompted on the terminal at boot up, the start and
> >> stop process of pyload does not look very good.
> >>
> >> If there is no such daemon, then please write a helper daemon that can
> >> be properly killed.
> >>
> >> -Michael
> >>
> >> On Wed, 2013-07-03 at 15:30 +0200, Thomas Ebert wrote:
> >>> Hi Daniel,
> >>>
> >>> i've updated the init.d script and changed the default download folder
> >>> to /var/pyload/Downloads.
> >>> I've deleted the old branch pyload in my reposistory and created a new
> >>> one with the same name.
> >>>
> >>> Regards
> >>> Thomas
> >>>
> >>> Am 2013-07-02 20:12, schrieb Thomas Ebert:
> >>>> Hi Daniel,
> >>>>
> >>>> i don't think that it's a big case to implement that things.
> >>>>
> >>>> I'll add these suggestions and make a new upload to my repository.
> >>>>
> >>>> Regards
> >>>> Thomas
> >>>>
> >>>> Am 2013-07-02 14:57, schrieb Daniel Weismüller:
> >>>>> Thomas,
> >>>>>
> >>>>> do you think you're able to implement the suggestions from Michael?
> >>>>>
> >>>>> - Daniel
> >>>>>
> >>>>>
> >>>>>
> >>>>> Am Montag, den 17.06.2013, 11:04 +0200 schrieb Daniel Weismüller:
> >>>>>> Hi
> >>>>>>
> >>>>>> Are there some news about pyload?
> >>>>>> What about the suggestions? Did someone try to implement them?
> >>>>>>
> >>>>>> - Daniel
> >>>>>>
> >>>>>>
> >>>>>> Am Dienstag, den 04.06.2013, 17:07 +0200 schrieb Michael Tremer:
> >>>>>>> Hi,
> >>>>>>>
> >>>>>>> yeah, I would also suggest that the data directories are moved to
> >>>>>> some
> >>>>>>> subdirectory of /var, because a full root device will kill the
> >>>>>> firewall
> >>>>>>> box eventually.
> >>>>>>>
> >>>>>>> I also checkout out the source and that looks pretty much okay.
> >>>>>> Some
> >>>>>>> files which don't necessarily need to be in the packages like all
> >>>>>> the
> >>>>>>> *.so links, but still.
> >>>>>>>
> >>>>>>> Please replace the initscript by something proper. You will find
> >>>>>> a
> >>>>>>> template at src/initscripts/init.d/template. Except that, things
> >>>>>> look
> >>>>>>> good.
> >>>>>>>
> >>>>>>> -Michael
> >>>>>>>
> >>>>>>> On Fri, 2013-05-31 at 09:14 +0800, Fajar Ramadhan wrote:
> >>>>>>>> Hi there,
> >>>>>>>>
> >>>>>>>> I have same problem just like ummeegge - /srv is too small
> >>>>>> (which is
> >>>>>>>> only 2 Gb here) to properly hold all downloaded files. So I
> >>>>>> change its
> >>>>>>>> download directory to /var/pyload and everything just works
> >>>>>> fine for
> >>>>>>>> me.
> >>>>>>>>
> >>>>>>>> One thing to remember : after you change pyload configurations,
> >>>>>> you
> >>>>>>>> should do manual pyload restart from web interface Administrate
> >>>>>> ->
> >>>>>>>> Restart pyLoad. pyLoad configurations wont change if you do
> >>>>>> restart
> >>>>>>>> using init script.
> >>>>>>>>
> >>>>>>>> I've tested some plugins such as download scheduler and youtube
> >>>>>> (I
> >>>>>>>> love youtube plugin since its able to download HD videos
> >>>>>>>> automagically) and its work like a charm. Now I have
> >>>>>> transmission and
> >>>>>>>> pyLoad running in my box, great! :)
> >>>>>>>>
> >>>>>>>> Regards,
> >>>>>>>>
> >>>>>>>> - Fajar R.
> >>>>>>>>
> >>>>>>>>> Subject: Re: pyload
> >>>>>>>>> From: ummeegge at ipfire.org
> >>>>>>>>> Date: Thu, 30 May 2013 17:52:19 +0200
> >>>>>>>>> To: development at lists.ipfire.org
> >>>>>>>>>
> >>>>>>>>> Hi Stefan,
> >>>>>>>>> so for the first the compiled binary (unrar) can be found in
> >>>>>> here
> >>>>>>>> http://people.ipfire.org/~ummeegge/unrarsrc/
> >>>>>>>>> i have installed now pyload and all the dependencies and for
> >>>>>> the
> >>>>>>>> first it looks very good. I could access the pyload
> >>>>>> webinterface with
> >>>>>>>> http://<IP-IPFire>:8086 and all menues are available. The start
> >>>>>> of
> >>>>>>>> different downloads over the "Add" button gives me also the
> >>>>>>>> possibility to create new folders in the Download section (have
> >>>>>> tested
> >>>>>>>> it now only with "Queue" not with "Collector", under the tab
> >>>>>> "Home"
> >>>>>>>> the overview of active downloads are displayed, also the
> >>>>>> "Queue" tab
> >>>>>>>> with his small function icons worked good for me.
> >>>>>>>>> The Logs section works also good and give a nice informative
> >>>>>>>> overview.
> >>>>>>>>> The administration tabs (Logout, Administrate, Info) on the
> >>>>>> right
> >>>>>>>> top of the WUI do their work.
> >>>>>>>>> I have had some problems by changing the config´s, the
> >>>>>> default
> >>>>>>>> download directory is located under /srv which wasn´t the best
> >>>>>> place
> >>>>>>>> for me cause mostly disc space is under /var or /mnt/harddisk
> >>>>>> so i
> >>>>>>>> tried to change it over the WUI but the changes doesn´t take
> >>>>>> affect,
> >>>>>>>> also the WUI seems to work buggy after this changes. I need to
> >>>>>> make
> >>>>>>>> a /etc/init.d/pyload stop/start (the init script from pyload
> >>>>>> seems not
> >>>>>>>> to work with restart) after this all went good again and the
> >>>>>> new
> >>>>>>>> download folder was accepted. So it seems like configuration
> >>>>>> changes
> >>>>>>>> needs to have an pyload restart, that the changes takes affect
> >>>>>> ?
> >>>>>>>>> I think there is no reconnect.sh script available or may i
> >>>>>> have
> >>>>>>>> overseen it...
> >>>>>>>>> The first impression of pyload is good but some further tests
> >>>>>> might
> >>>>>>>> be important i think.
> >>>>>>>>> Thanks for your good work and greetings
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Erik
> >>>>>>>>>
> >>>>>>>>> Am 30.05.2013 um 10:32 schrieb Erik K.:
> >>>>>>>>>
> >>>>>>>>>>> Hi Stefan and Daniel,
> >>>>>>>>>>> @Stefan i think unrar is not available in Pakfire, but i
> >>>>>> compile
> >>>>>>>> it at this time. If the build process is finished, i upload it
> >>>>>> to my
> >>>>>>>> home directory. I will go then also for some tests.
> >>>>>>>>>>> Feedback will come soon.
> >>>>>>>>>>>
> >>>>>>>>>>> Greetings
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Erik
> >>>>>>>>>>>
> >>>>>>>>>>> Am 29.05.2013 um 21:53 schrieb Stefan Schantl:
> >>>>>>>>>>>
> >>>>>>>>>>>> Hello Daniel,
> >>>>>>>>>>>>
> >>>>>>>>>>>> thanks for testing the packages, are they also affected
> >>>>>> by the
> >>>>>>>> "/etc/init.d/" bug ?
> >>>>>>>>>>>> All mailing list followers, please join the team and test
> >>>>>> the
> >>>>>>>> pyload package and it's dependencies.
> >>>>>>>>>>>> The installation of the packages is pretty easy:
> >>>>>>>>>>>>
> >>>>>>>>>>>> * Install sqlite, pycurl and unrar by using pakfire.
> >>>>>> "pakfire
> >>>>>>>> install sqlite pycurl unrar" or do it over the WUI.
> >>>>>>>>>>>> * Download pyload and the dependecies from here:
> >>>>>>>> http://people.ipfire.org/~stevee/testing/
> >>>>>>>>>>>> * Put them on your IPFire into the "/opt/pakfire/tmp"
> >>>>>> directory.
> >>>>>>>>>>>> * Unextract the downloaded files with tar - "tar -xvf
> >>>>>>>> file.ipfire" and install it with "./install.sh"
> >>>>>>>>>>>> * Be sure to install the pyload package at the end -
> >>>>>> pyload
> >>>>>>>> automatically will be started.
> >>>>>>>>>>>> The GUI, as Daniel already documented will be available
> >>>>>> at
> >>>>>>>> "http://<ip-of-your-ipfire>:8086", the default credentials are
> >>>>>>>> "pyload" with the password "secret".
> >>>>>>>>>>>> Please report any problems or errors, to get rid of them
> >>>>>> and to
> >>>>>>>> speed up the final merge into the main distribution.
> >>>>>>>>>>>> A big thanks,
> >>>>>>>>>>>>
> >>>>>>>>>>>> - Stefan
> >>>>>>>>>>>>
> >>>>>>>>>>>>> Yesterday I've tested the pyload packages from Stevee.
> >>>>>>>>>>>>> http://people.ipfire.org/~stevee/testing/
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Installationorder: leptonica, tesseract-ocr,
> >>>>>> python-pyOpenSSL,
> >>>>>>>>>>>>> python-Jinja2, python-Beaker, python-thrift,
> >>>>>> python-simplejson,
> >>>>>>>>>>>>> python-pycrypto, python-pytesser, python-PIL,
> >>>>>>>> python-BeautifulSoup,
> >>>>>>>>>>>>> spidermonkey, sqlite, pycurl, unrar, pyload
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> sqlite and pycurl you find in the pakfire.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> After I've installed everything the pyload webinterface
> >>>>>> was
> >>>>>>>> reachable on
> >>>>>>>>>>>>> ipfire:8086.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> username: pyload
> >>>>>>>>>>>>> password: secret
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> At first pyload seems to work fine. Also automatic unrar
> >>>>>> and
> >>>>>>>> unzip of
> >>>>>>>>>>>>> compressed files work fine.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> The only thing is that every one minute there is the
> >>>>>> following
> >>>>>>>> entry in
> >>>>>>>>>>>>> the logfile.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> 149 28.05.2013 08:49:34 ERROR Error executing hooks:
> >>>>>> 'NoneType'
> >>>>>>>> object
> >>>>>>>>>>>>> has no attribute '__getitem__'
> >>>>>>>>>>>>> 150 28.05.2013 08:50:34 ERROR Error executing hooks:
> >>>>>> 'NoneType'
> >>>>>>>> object
> >>>>>>>>>>>>> has no attribute '__getitem__'
> >>>>>>>>>>>>> 151 28.05.2013 08:51:34 ERROR Error executing hooks:
> >>>>>> 'NoneType'
> >>>>>>>> object
> >>>>>>>>>>>>> has no attribute '__getitem__'
> >>>>>>>>>>>>> 152 28.05.2013 08:52:34 ERROR Error executing hooks:
> >>>>>> 'NoneType'
> >>>>>>>> object
> >>>>>>>>>>>>> has no attribute '__getitem__'
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Maybe someone could verify it.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> - Daniel
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>>> Development mailing list
> >>>>>>>>>>>>> Development at lists.ipfire.org
> >>>>>>>>>>>>> http://lists.ipfire.org/mailman/listinfo/development
> >>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>> Development mailing list
> >>>>>>>>>>>> Development at lists.ipfire.org
> >>>>>>>>>>>> http://lists.ipfire.org/mailman/listinfo/development
> >>>>>>>>>> _______________________________________________
> >>>>>>>>>> Development mailing list
> >>>>>>>>>> Development at lists.ipfire.org
> >>>>>>>>>> http://lists.ipfire.org/mailman/listinfo/development
> >>>>>>>>> _______________________________________________
> >>>>>>>>> Development mailing list
> >>>>>>>>> Development at lists.ipfire.org
> >>>>>>>>> http://lists.ipfire.org/mailman/listinfo/development
> >>>>>>>> _______________________________________________
> >>>>>>>> Development mailing list
> >>>>>>>> Development at lists.ipfire.org
> >>>>>>>> http://lists.ipfire.org/mailman/listinfo/development
> >>>>>>> _______________________________________________
> >>>>>>> Development mailing list
> >>>>>>> Development at lists.ipfire.org
> >>>>>>> http://lists.ipfire.org/mailman/listinfo/development
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> Development mailing list
> >>>>>> Development at lists.ipfire.org
> >>>>>> http://lists.ipfire.org/mailman/listinfo/development
> >>>> _______________________________________________
> >>>> Development mailing list
> >>>> Development at lists.ipfire.org
> >>>> http://lists.ipfire.org/mailman/listinfo/development
> >>> _______________________________________________
> >>> Development mailing list
> >>> Development at lists.ipfire.org
> >>> http://lists.ipfire.org/mailman/listinfo/development
> >> _______________________________________________
> >> Development mailing list
> >> Development at lists.ipfire.org
> >> http://lists.ipfire.org/mailman/listinfo/development
> >
> >
> 




More information about the Development mailing list