Re: [PATCH v2] unbound: New package

Merged. I also built ldns, so this set of libraries should be complete.

-Michael

On Sun, 2015-10-18 at 20:13 +0200, Stefan Schantl wrote:

Unbound is a validating, recursive, and caching DNS resolver.

The package comes with libraries that are used by many other packages to resolve DNS records and validate those by using DNSSEC.

Fixes #10943.

Signed-off-by: Stefan Schantl stefan.schantl@ipfire.org

unbound/dlv.isc.org.key | 2 + unbound/icannbundle.pem | 317 ++++++++++++++++ unbound/root.anchor | 1 + unbound/root.key | 6 + unbound/systemd/unbound-anchor.service | 9 + unbound/systemd/unbound-anchor.timer | 14 + unbound/systemd/unbound-keygen.service | 14 + unbound/systemd/unbound.service | 18 + unbound/unbound.conf | 655 +++++++++++++++++++++++++++++++++ unbound/unbound.nm | 162 ++++++++ unbound/unbound.tmpfiles | 1 + 11 files changed, 1199 insertions(+) create mode 100644 unbound/dlv.isc.org.key create mode 100644 unbound/icannbundle.pem create mode 100644 unbound/root.anchor create mode 100644 unbound/root.key create mode 100644 unbound/systemd/unbound-anchor.service create mode 100644 unbound/systemd/unbound-anchor.timer create mode 100644 unbound/systemd/unbound-keygen.service create mode 100644 unbound/systemd/unbound.service create mode 100644 unbound/unbound.conf create mode 100644 unbound/unbound.nm create mode 100644 unbound/unbound.tmpfiles

diff --git a/unbound/dlv.isc.org.key b/unbound/dlv.isc.org.key new file mode 100644 index 0000000..c73944f --- /dev/null +++ b/unbound/dlv.isc.org.key @@ -0,0 +1,2 @@ +; https://secure.isc.org/ops/dlv/dlv.isc.org.key +dlv.isc.org. IN DNSKEY 257 3 5 BEAAAAPHMu/5onzrEE7z1egmhg/WPO0+juoZrW3euWEn4MxDCE1+lLy2 brhQv5rN32RKtMzX6Mj70jdzeND4XknW58dnJNPCxn8+jAGl2FZLK8t+ 1uq4W+nnA3qO2+DL+k6BD4mewMLbIYFwe0PG73Te9fZ2kJb56dhgMde5 ymX4BI/oQ+cAK50/xvJv00Frf8kw6ucMTwFlgPe+jnGxPPEmHAte/URk Y62ZfkLoBAADLHQ9IrS2tryAe7mbBZVcOwIeU/Rw/mRx/vwwMCTgNboM QKtUdvNXDrYJDSHZws3xiRXF1Rf+al9UmZfSav/4NWLKjHzpT59k/VSt TDN0YUuWrBNh diff --git a/unbound/icannbundle.pem b/unbound/icannbundle.pem new file mode 100644 index 0000000..48941de --- /dev/null +++ b/unbound/icannbundle.pem @@ -0,0 +1,317 @@ +Certificate:

• Data:

•    Version: 3 (0x2)
  

•    Serial Number: 1 (0x1)
  

•    Signature Algorithm: sha256WithRSAEncryption
  

•    Issuer: O=ICANN, OU=ICANN Certification Authority, CN=ICANN
  

Root CA, C=US

•    Validity
  

•        Not Before: Dec 23 04:19:12 2009 GMT
  

•        Not After : Dec 18 04:19:12 2029 GMT
  

•    Subject: O=ICANN, OU=ICANN Certification Authority, CN=ICANN
  

Root CA, C=US

•    Subject Public Key Info:
  

•        Public Key Algorithm: rsaEncryption
  

•        RSA Public Key: (2048 bit)
  

•            Modulus (2048 bit):
  

•                00:a0:db:70:b8:4f:34:da:9c:d4:d0:7e:bb:ea:15:
  

•                bc:e9:c9:11:2a:1f:61:2f:6a:b9:bd:3f:3d:76:a0:
  

•                9a:0a:f7:ee:93:6e:6e:55:53:84:8c:f2:2c:f1:82:
  

•                27:c8:0f:9a:cf:52:1b:54:da:28:d2:2c:30:8e:dd:
  

•                fb:92:20:33:2d:d6:c8:f1:0e:10:21:88:71:fa:84:
  

•                22:4b:5d:47:56:16:7c:9b:9f:5d:c3:11:79:9c:14:
  

•                e2:ff:c0:74:ac:dd:39:d7:e0:38:d8:b0:73:aa:fb:
  

•                d1:db:84:af:52:22:a8:f6:d5:9b:94:f4:e6:5d:5e:
  

•                e8:3f:87:90:0b:c7:1a:77:f5:2e:d3:8f:1a:ce:02:
  

•                1d:07:69:21:47:32:da:46:ae:00:4c:b6:a5:a2:9c:
  

•                39:c1:c0:4a:f6:d3:1c:ae:d3:6d:bb:c7:18:f0:7e:
  

•                ed:f6:80:ce:d0:01:2e:89:de:12:ba:ee:11:cb:a6:
  

•                7a:d7:0d:7c:f3:08:8d:72:9d:bf:55:75:13:70:bb:
  

•                31:22:4a:cb:e8:c0:aa:a4:09:aa:36:68:40:60:74:
  

•                9d:e7:19:81:43:22:52:fe:c9:2b:52:0f:41:13:36:
  

•                09:72:65:95:cc:89:ae:6f:56:17:16:34:73:52:a3:
  

•                04:ed:bd:88:82:8a:eb:d7:dc:82:52:9c:06:e1:52:
  

•                85:41
  

•            Exponent: 65537 (0x10001)
  

•    X509v3 extensions:
  

•        X509v3 Basic Constraints: critical
  

•            CA:TRUE
  

•        X509v3 Key Usage: critical
  

•            Digital Signature, Non Repudiation, Key
  

Encipherment, Data Encipherment, Key Agreement, Certificate Sign, CRL Sign

•        X509v3 Subject Key Identifier: 
  

BA:52:E9:49:83:24:86:52:2F:C7:99:CD:FC:8D:6B:69:08:4D:C0:50

• Signature Algorithm: sha256WithRSAEncryption

•    0f:f1:e9:82:a2:0a:87:9f:2d:94:60:5a:b2:c0:4b:a1:2f:2b:
  

•    3b:47:d5:0a:99:86:38:b2:ec:c6:3b:89:e4:6e:07:cf:14:c7:
  

•    c7:e8:cf:99:8f:aa:30:c3:19:70:b9:e6:6d:d6:3f:c8:68:26:
  

•    b2:a0:a5:37:42:ca:d8:62:80:d1:a2:5a:48:2e:1f:85:3f:0c:
  

•    7b:c2:c7:94:11:5f:19:2a:95:ac:a0:3a:03:d8:91:5b:2e:0d:
  

•    9c:7c:1f:2e:fc:e9:44:e1:16:26:73:1c:45:4a:65:c1:83:4c:
  

•    90:f3:f2:28:42:df:db:c4:e7:04:12:18:62:43:5e:bc:1f:6c:
  

•    84:e6:bc:49:32:df:61:d7:99:ee:e4:90:52:7b:0a:c2:91:8a:
  

•    98:62:66:b1:c8:e0:b7:5a:b5:46:7c:76:71:54:8e:cc:a4:81:
  

•    5c:19:db:d2:6f:66:b5:bb:2b:ae:6b:c9:74:04:a8:24:de:e8:
  

•    c5:d3:fc:2c:1c:d7:8f:db:6a:8d:c9:53:be:5d:50:73:ac:cf:
  

•    1f:93:c0:52:50:5b:a2:4f:fe:ad:65:36:17:46:d1:2d:e5:a2:
  

•    90:66:05:db:29:4e:5d:50:5d:e3:4f:da:a0:8f:f0:6b:e4:16:
  

•    70:dd:7f:f3:77:7d:b9:4e:f9:ec:c3:33:02:d7:e9:63:2f:31:
  

•    e7:40:61:a4
  

+-----BEGIN CERTIFICATE----- +MIIDdzCCAl+gAwIBAgIBATANBgkqhkiG9w0BAQsFADBdMQ4wDAYDVQQKEwVJQ0FO +TjEmMCQGA1UECxMdSUNBTk4gQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkxFjAUBgNV +BAMTDUlDQU5OIFJvb3QgQ0ExCzAJBgNVBAYTAlVTMB4XDTA5MTIyMzA0MTkxMloX +DTI5MTIxODA0MTkxMlowXTEOMAwGA1UEChMFSUNBTk4xJjAkBgNVBAsTHUlDQU5O +IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MRYwFAYDVQQDEw1JQ0FOTiBSb290IENB +MQswCQYDVQQGEwJVUzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAKDb +cLhPNNqc1NB+u+oVvOnJESofYS9qub0/PXagmgr37pNublVThIzyLPGCJ8gPms9S +G1TaKNIsMI7d+5IgMy3WyPEOECGIcfqEIktdR1YWfJufXcMReZwU4v/AdKzdOdfg +ONiwc6r70duEr1IiqPbVm5T05l1e6D+HkAvHGnf1LtOPGs4CHQdpIUcy2kauAEy2 +paKcOcHASvbTHK7TbbvHGPB+7faAztABLoneErruEcumetcNfPMIjXKdv1V1E3C7 +MSJKy+jAqqQJqjZoQGB0necZgUMiUv7JK1IPQRM2CXJllcyJrm9WFxY0c1KjBO29 +iIKK69fcglKcBuFShUECAwEAAaNCMEAwDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8B +Af8EBAMCAf4wHQYDVR0OBBYEFLpS6UmDJIZSL8eZzfyNa2kITcBQMA0GCSqGSIb3 +DQEBCwUAA4IBAQAP8emCogqHny2UYFqywEuhLys7R9UKmYY4suzGO4nkbgfPFMfH +6M+Zj6owwxlwueZt1j/IaCayoKU3QsrYYoDRolpILh+FPwx7wseUEV8ZKpWsoDoD +2JFbLg2cfB8u/OlE4RYmcxxFSmXBg0yQ8/IoQt/bxOcEEhhiQ168H2yE5rxJMt9h +15nu5JBSewrCkYqYYmaxyOC3WrVGfHZxVI7MpIFcGdvSb2a1uyuua8l0BKgk3ujF +0/wsHNeP22qNyVO+XVBzrM8fk8BSUFuiT/6tZTYXRtEt5aKQZgXbKU5dUF3jT9qg +j/Br5BZw3X/zd325TvnswzMC1+ljLzHnQGGk +-----END CERTIFICATE----- +Certificate:

• Data:

•    Version: 3 (0x2)
  

•    Serial Number: 2 (0x2)
  

•    Signature Algorithm: sha256WithRSAEncryption
  

•    Issuer: O=ICANN, OU=ICANN Certification Authority, CN=ICANN
  

Root CA, C=US

•    Validity
  

•        Not Before: Dec 23 04:45:04 2009 GMT
  

•        Not After : Dec 22 04:45:04 2014 GMT
  

•    Subject: O=ICANN, CN=ICANN DNSSEC 
  

CA/emailAddress=dnssec@icann.org

•    Subject Public Key Info:
  

•        Public Key Algorithm: rsaEncryption
  

•        RSA Public Key: (2048 bit)
  

•            Modulus (2048 bit):
  

•                00:c0:bf:e2:b4:ee:12:46:36:3b:7c:d2:46:21:64:
  

•                5a:93:e1:e3:02:10:25:bb:a5:30:70:19:89:98:7e:
  

•                9e:db:8e:0f:ac:c8:48:66:0e:1a:f8:81:e5:2d:3c:
  

•                7b:39:39:76:28:8f:ee:0a:a7:dd:64:e9:5f:87:25:
  

•                b1:64:e5:59:03:fc:bc:29:3b:63:37:c8:d7:46:9a:
  

•                b6:ce:87:55:cd:cf:e2:ab:e9:c7:8a:53:2e:25:87:
  

•                b0:98:d6:20:a3:a8:ec:87:b0:39:a3:c4:c5:75:59:
  

•                3c:fb:91:03:fa:ee:7f:e9:2b:b6:70:88:69:2c:e6:
  

•                f1:4f:fc:d0:47:b4:e9:a0:2c:fa:0c:c3:84:eb:be:
  

•                73:5a:bc:16:ed:d0:83:02:2d:eb:6a:21:02:51:70:
  

•                29:1e:4f:c9:69:03:9f:91:32:5c:2c:1a:9f:5e:45:
  

•                48:2a:50:ee:72:14:ec:17:29:fc:20:95:7d:22:6a:
  

•                c6:6f:83:a2:58:8e:b1:64:c8:73:23:54:6c:69:1d:
  

•                66:1f:df:f8:4f:24:a1:a8:ae:00:7f:e9:89:41:a6:
  

•                e3:88:1d:3a:e1:b3:3a:ef:29:45:32:9b:94:2e:b7:
  

•                6c:1e:fe:31:40:13:e1:bd:52:67:d0:d8:c3:3e:03:
  

•                84:48:72:9d:bd:8a:48:a0:f2:72:35:b6:03:4b:c6:
  

•                e9:05
  

•            Exponent: 65537 (0x10001)
  

•    X509v3 extensions:
  

•        X509v3 Basic Constraints: critical
  

•            CA:TRUE
  

•        X509v3 Key Usage: critical
  

•            Digital Signature, Non Repudiation, Key
  

Encipherment, Data Encipherment, Key Agreement, Certificate Sign, CRL Sign

•        X509v3 Authority Key Identifier: 
  

keyid:BA:52:E9:49:83:24:86:52:2F:C7:99:CD:FC:8D:6B:69:08:4D:C0:50

•        X509v3 Subject Key Identifier: 
  

8F:B2:42:69:C3:9D:E4:3C:FA:13:B9:FF:F2:C0:A4:EF:D8:0F:E8:22

• Signature Algorithm: sha256WithRSAEncryption

•    4a:78:a2:47:7e:3f:2e:4d:78:68:ab:06:5c:ff:da:01:04:45:
  

•    92:20:20:88:f3:dc:4e:70:01:9b:cb:f3:13:61:34:04:09:15:
  

•    d0:be:99:1c:be:fc:97:e9:2d:73:e1:b3:2b:a6:b9:3a:41:33:
  

•    f3:83:3d:64:1b:64:95:bf:ae:cd:20:df:18:e0:62:8d:fa:9c:
  

•    f7:d8:a9:3c:25:2b:8e:cf:10:e5:29:b9:af:1a:7f:62:64:75:
  

•    e7:c6:fd:9b:6d:71:c0:a9:b3:0f:9a:b7:7a:fe:53:04:18:cd:
  

•    04:06:d9:bf:01:0e:cc:04:84:84:51:a3:e9:06:2a:a3:25:73:
  

•    4e:8d:62:19:13:25:5b:de:0b:dc:d0:69:01:ca:41:0a:96:13:
  

•    cf:6a:11:fe:2b:9a:3f:fd:56:3d:73:3d:58:49:c2:71:83:20:
  

•    23:6d:46:99:6e:37:91:9f:76:2a:9c:b0:69:3f:64:9f:05:bb:
  

•    38:c8:1e:ca:d8:6c:fd:56:3e:a6:85:a2:53:80:c6:42:b6:79:
  

•    c6:43:0b:e0:6c:ea:9f:cf:b0:2a:2c:01:50:c3:d8:0f:a0:7e:
  

•    a1:73:a8:5c:84:27:5b:c9:4b:5a:13:e9:69:25:1c:59:11:d2:
  

•    01:dc:da:e7:c8:44:34:a2:e4:99:25:b4:c3:23:b5:f8:2d:48:
  

•    e5:8d:06:73
  

+-----BEGIN CERTIFICATE----- +MIIDhjCCAm6gAwIBAgIBAjANBgkqhkiG9w0BAQsFADBdMQ4wDAYDVQQKEwVJQ0FO +TjEmMCQGA1UECxMdSUNBTk4gQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkxFjAUBgNV +BAMTDUlDQU5OIFJvb3QgQ0ExCzAJBgNVBAYTAlVTMB4XDTA5MTIyMzA0NDUwNFoX +DTE0MTIyMjA0NDUwNFowSzEOMAwGA1UEChMFSUNBTk4xGDAWBgNVBAMTD0lDQU5O +IEROU1NFQyBDQTEfMB0GCSqGSIb3DQEJARMQZG5zc2VjQGljYW5uLm9yZzCCASIw +DQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMC/4rTuEkY2O3zSRiFkWpPh4wIQ +JbulMHAZiZh+ntuOD6zISGYOGviB5S08ezk5diiP7gqn3WTpX4clsWTlWQP8vCk7 +YzfI10aats6HVc3P4qvpx4pTLiWHsJjWIKOo7IewOaPExXVZPPuRA/ruf+krtnCI +aSzm8U/80Ee06aAs+gzDhOu+c1q8Fu3QgwIt62ohAlFwKR5PyWkDn5EyXCwan15F +SCpQ7nIU7Bcp/CCVfSJqxm+DoliOsWTIcyNUbGkdZh/f+E8koaiuAH/piUGm44gd +OuGzOu8pRTKblC63bB7+MUAT4b1SZ9DYwz4DhEhynb2KSKDycjW2A0vG6QUCAwEA +AaNjMGEwDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8EBAMCAf4wHwYDVR0jBBgw +FoAUulLpSYMkhlIvx5nN/I1raQhNwFAwHQYDVR0OBBYEFI+yQmnDneQ8+hO5//LA +pO/YD+giMA0GCSqGSIb3DQEBCwUAA4IBAQBKeKJHfj8uTXhoqwZc/9oBBEWSICCI +89xOcAGby/MTYTQECRXQvpkcvvyX6S1z4bMrprk6QTPzgz1kG2SVv67NIN8Y4GKN ++pz32Kk8JSuOzxDlKbmvGn9iZHXnxv2bbXHAqbMPmrd6/lMEGM0EBtm/AQ7MBISE +UaPpBiqjJXNOjWIZEyVb3gvc0GkBykEKlhPPahH+K5o//VY9cz1YScJxgyAjbUaZ +bjeRn3YqnLBpP2SfBbs4yB7K2Gz9Vj6mhaJTgMZCtnnGQwvgbOqfz7AqLAFQw9gP +oH6hc6hchCdbyUtaE+lpJRxZEdIB3NrnyEQ0ouSZJbTDI7X4LUjljQZz +-----END CERTIFICATE----- +Certificate:

• Data:

•    Version: 3 (0x2)
  

•    Serial Number: 6 (0x6)
  

•    Signature Algorithm: sha256WithRSAEncryption
  

•    Issuer: O=ICANN, OU=ICANN Certification Authority, CN=ICANN
  

Root CA, C=US

•    Validity
  

•        Not Before: Dec 23 05:21:16 2009 GMT
  

•        Not After : Dec 22 05:21:16 2014 GMT
  

•    Subject: O=ICANN, CN=ICANN EMAIL CA
  

•    Subject Public Key Info:
  

•        Public Key Algorithm: rsaEncryption
  

•        RSA Public Key: (2048 bit)
  

•            Modulus (2048 bit):
  

•                00:d2:19:1e:22:69:33:f6:a4:d2:76:c5:80:11:75:
  

•                8e:d0:e8:6f:bf:89:f8:2a:6a:da:8a:85:28:40:ba:
  

•                c5:23:5f:47:ed:72:e2:8e:d3:5c:c8:8a:3a:99:a9:
  

•                57:2c:0a:2b:22:f3:54:7b:8b:f7:8c:21:a2:50:01:
  

•                4f:8b:af:34:df:72:fc:78:31:d0:1d:eb:bc:9b:e6:
  

•                fa:c1:84:d0:05:07:8a:74:53:a5:60:9e:eb:75:9e:
  

•                a8:5d:32:c8:02:32:e4:bf:cb:97:9b:7a:fa:2c:f6:
  

•                6a:1d:b8:57:ad:e3:03:22:93:d0:f4:4f:a8:b8:01:
  

•                db:82:33:98:b6:87:ed:3d:67:40:00:27:2e:d5:95:
  

•                d2:ad:36:46:14:c6:17:79:65:7f:65:f3:88:80:65:
  

•                7c:22:67:08:23:3c:cf:a5:10:38:72:30:97:92:6f:
  

•                20:4a:ba:24:4c:4a:c8:4a:a5:dc:2a:44:a1:29:78:
  

•                b4:9f:fe:84:ff:27:5b:3a:72:ea:31:c1:ad:06:22:
  

•                d6:44:a0:4a:57:32:9c:f2:46:47:d0:89:6e:20:23:
  

•                2c:ea:b0:83:7e:c1:f3:ea:da:dd:e3:63:59:97:21:
  

•                fa:1b:11:39:27:cf:82:8b:56:15:d4:36:92:0c:a5:
  

•                7e:80:e0:18:c9:50:08:42:0a:df:97:3c:9c:b8:0a:
  

•                4d:b1
  

•            Exponent: 65537 (0x10001)
  

•    X509v3 extensions:
  

•        X509v3 Basic Constraints: critical
  

•            CA:TRUE
  

•        X509v3 Key Usage: critical
  

•            Digital Signature, Non Repudiation, Key
  

Encipherment, Data Encipherment, Key Agreement, Certificate Sign, CRL Sign

•        X509v3 Authority Key Identifier: 
  

keyid:BA:52:E9:49:83:24:86:52:2F:C7:99:CD:FC:8D:6B:69:08:4D:C0:50

•        X509v3 Subject Key Identifier: 
  

7B:3F:BA:CE:A1:B3:A6:13:2E:5A:82:84:D4:D2:EA:A5:24:F1:CD:B4

• Signature Algorithm: sha256WithRSAEncryption

•    50:07:a5:61:39:e4:3b:e3:bc:1c:b4:a7:b2:ab:a1:fb:47:bf:
  

•    b4:1c:32:ac:3c:46:b0:02:26:2f:16:3e:89:70:e2:87:e9:76:
  

•    99:61:0b:91:c5:48:7a:e5:aa:24:0b:39:e0:4f:26:03:d4:5b:
  

•    01:8a:4d:b6:98:cc:16:fa:e2:12:4a:88:b9:53:bb:50:2d:c7:
  

•    37:b8:a3:82:2d:52:05:3e:46:a7:db:97:82:73:8d:7d:ed:dd:
  

•    9e:37:73:68:6b:90:cd:62:d8:77:ff:32:53:bb:d3:a1:b9:cb:
  

•    7d:32:29:70:fb:2e:90:4b:27:12:6d:99:a5:e6:d4:ef:13:32:
  

•    c1:2f:b5:ae:6e:11:0e:50:56:a4:56:5b:76:b0:c0:99:2e:5a:
  

•    94:17:ee:2b:c1:b6:9c:8b:68:ac:55:95:31:8c:66:2b:35:43:
  

•    a5:13:04:1b:50:44:1c:55:7f:4c:d0:1a:50:80:53:45:a8:e3:
  

•    d3:a8:74:ad:7d:6a:d6:e9:9a:d3:25:7d:83:e2:57:64:1a:94:
  

•    7e:bc:cb:ef:79:b5:54:6a:f1:b0:c3:81:26:90:e5:40:87:ed:
  

•    75:7d:83:63:5b:ab:45:c0:34:04:27:e8:d8:12:26:7c:5e:c0:
  

•    48:b6:33:7d:4b:db:23:8a:f7:13:24:bc:be:7b:74:cb:c4:ed:
  

•    ed:42:eb:2f
  

+-----BEGIN CERTIFICATE----- +MIIDZDCCAkygAwIBAgIBBjANBgkqhkiG9w0BAQsFADBdMQ4wDAYDVQQKEwVJQ0FO +TjEmMCQGA1UECxMdSUNBTk4gQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkxFjAUBgNV +BAMTDUlDQU5OIFJvb3QgQ0ExCzAJBgNVBAYTAlVTMB4XDTA5MTIyMzA1MjExNloX +DTE0MTIyMjA1MjExNlowKTEOMAwGA1UEChMFSUNBTk4xFzAVBgNVBAMTDklDQU5O +IEVNQUlMIENBMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA0hkeImkz +9qTSdsWAEXWO0Ohvv4n4KmraioUoQLrFI19H7XLijtNcyIo6malXLAorIvNUe4v3 +jCGiUAFPi68033L8eDHQHeu8m+b6wYTQBQeKdFOlYJ7rdZ6oXTLIAjLkv8uXm3r6 +LPZqHbhXreMDIpPQ9E+ouAHbgjOYtoftPWdAACcu1ZXSrTZGFMYXeWV/ZfOIgGV8 +ImcIIzzPpRA4cjCXkm8gSrokTErISqXcKkShKXi0n/6E/ydbOnLqMcGtBiLWRKBK +VzKc8kZH0IluICMs6rCDfsHz6trd42NZlyH6GxE5J8+Ci1YV1DaSDKV+gOAYyVAI +QgrflzycuApNsQIDAQABo2MwYTAPBgNVHRMBAf8EBTADAQH/MA4GA1UdDwEB/wQE +AwIB/jAfBgNVHSMEGDAWgBS6UulJgySGUi/Hmc38jWtpCE3AUDAdBgNVHQ4EFgQU +ez+6zqGzphMuWoKE1NLqpSTxzbQwDQYJKoZIhvcNAQELBQADggEBAFAHpWE55Dvj +vBy0p7KroftHv7QcMqw8RrACJi8WPolw4ofpdplhC5HFSHrlqiQLOeBPJgPUWwGK +TbaYzBb64hJKiLlTu1Atxze4o4ItUgU+Rqfbl4JzjX3t3Z43c2hrkM1i2Hf/MlO7 +06G5y30yKXD7LpBLJxJtmaXm1O8TMsEvta5uEQ5QVqRWW3awwJkuWpQX7ivBtpyL +aKxVlTGMZis1Q6UTBBtQRBxVf0zQGlCAU0Wo49OodK19atbpmtMlfYPiV2QalH68 +y+95tVRq8bDDgSaQ5UCH7XV9g2Nbq0XANAQn6NgSJnxewEi2M31L2yOK9xMkvL57 +dMvE7e1C6y8= +-----END CERTIFICATE----- +Certificate:

• Data:

•    Version: 3 (0x2)
  

•    Serial Number: 3 (0x3)
  

•    Signature Algorithm: sha256WithRSAEncryption
  

•    Issuer: O=ICANN, OU=ICANN Certification Authority, CN=ICANN
  

Root CA, C=US

•    Validity
  

•        Not Before: Dec 23 05:07:29 2009 GMT
  

•        Not After : Dec 22 05:07:29 2014 GMT
  

•    Subject: O=ICANN, CN=ICANN SSL CA
  

•    Subject Public Key Info:
  

•        Public Key Algorithm: rsaEncryption
  

•        RSA Public Key: (2048 bit)
  

•            Modulus (2048 bit):
  

•                00:dd:c6:ab:bf:7c:66:9d:b3:2b:96:00:14:c7:60:
  

•                7a:8d:62:5b:26:4b:30:d7:b3:4c:82:69:c6:4d:4d:
  

•                73:f3:d4:91:21:5d:ab:35:f0:c8:04:0e:f4:a3:35:
  

•                e2:e1:18:a9:98:12:03:58:f8:9f:eb:77:54:5b:89:
  

•                81:26:c9:aa:c2:f4:c9:0c:82:57:2a:5e:05:e9:61:
  

•                17:cc:19:18:71:eb:35:83:c1:86:9d:ec:f1:6b:ca:
  

•                dd:a1:96:0b:95:d4:e1:0f:9e:24:6f:dc:3c:d0:28:
  

•                9e:f2:53:47:2b:a1:ad:32:03:c8:3f:0d:80:80:7d:
  

•                f0:02:d2:6e:5a:2c:44:21:9b:09:50:15:3f:a1:3d:
  

•                d3:c9:c8:24:e7:ea:4e:92:2f:94:90:2e:de:e7:68:
  

•                f6:c6:b3:90:1f:bc:c9:7b:a2:65:d7:11:e9:8b:f0:
  

•                3a:5a:b7:17:07:df:69:e3:6e:b9:54:6a:8e:3a:aa:
  

•                94:7f:2c:0a:a1:ad:ba:b7:d9:60:62:27:a7:71:40:
  

•                3b:8e:b0:84:7b:b8:c8:67:ef:66:ba:3d:ac:c3:85:
  

•                e5:86:bb:a7:9c:fd:b6:e1:c0:10:53:3d:d4:7e:1b:
  

•                09:e6:9f:22:5c:a7:27:09:7e:27:12:33:fa:df:9b:
  

•                20:2f:14:f7:17:c0:e4:1e:07:91:1f:f9:9a:cd:a8:
  

•                e2:c5
  

•            Exponent: 65537 (0x10001)
  

•    X509v3 extensions:
  

•        X509v3 Basic Constraints: critical
  

•            CA:TRUE
  

•        X509v3 Key Usage: critical
  

•            Digital Signature, Non Repudiation, Key
  

Encipherment, Data Encipherment, Key Agreement, Certificate Sign, CRL Sign

•        X509v3 Authority Key Identifier: 
  

keyid:BA:52:E9:49:83:24:86:52:2F:C7:99:CD:FC:8D:6B:69:08:4D:C0:50

•        X509v3 Subject Key Identifier: 
  

6E:77:A8:40:10:4A:D8:9C:0C:F2:B7:5A:3A:A5:2F:79:4A:61:14:D8

• Signature Algorithm: sha256WithRSAEncryption

•    18:42:62:df:aa:8e:44:e6:87:10:4d:d9:a6:b2:c3:97:37:43:
  

•    2e:ce:f3:e0:3c:c2:2f:e1:78:60:41:a9:2b:5d:f4:24:f5:f6:
  

•    57:a2:08:ec:9c:89:e5:54:50:a8:30:c6:20:e5:8a:c7:8b:bd:
  

•    fd:98:b6:0c:7d:1a:1f:01:a1:4a:4e:ec:0d:2a:aa:9f:fd:a9:
  

•    20:0d:b3:5c:0f:36:c0:2c:2b:c6:75:22:29:66:a3:34:bd:93:
  

•    3d:f6:28:da:90:d5:7e:91:df:d3:06:f6:69:8b:80:9b:a5:34:
  

•    af:6a:02:5b:e4:52:7d:56:4d:99:6e:fe:e9:d0:36:99:58:d9:
  

•    af:cd:79:9b:e5:d2:4c:35:90:d3:e0:68:b2:88:2b:18:39:2e:
  

•    bc:0b:d9:82:84:7f:24:12:92:d2:b9:13:4f:64:bc:46:e1:5c:
  

•    6a:ed:f7:b0:d4:66:27:25:21:86:b4:3a:5e:19:a3:c7:8b:4b:
  

•    93:b9:2e:37:e2:6d:8b:46:ee:68:39:21:75:e8:fe:2a:a7:85:
  

•    fd:68:26:96:bd:dd:f9:f1:fe:99:5f:b4:a4:97:1b:50:18:fa:
  

•    21:90:54:0c:8b:30:28:94:70:19:34:9e:5c:e1:e5:48:93:af:
  

•    aa:a3:b4:95:b2:f5:4c:97:50:44:58:97:e1:ff:e7:b2:10:dd:
  

•    2c:fe:c0:ed
  

+-----BEGIN CERTIFICATE----- +MIIDYjCCAkqgAwIBAgIBAzANBgkqhkiG9w0BAQsFADBdMQ4wDAYDVQQKEwVJQ0FO +TjEmMCQGA1UECxMdSUNBTk4gQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkxFjAUBgNV +BAMTDUlDQU5OIFJvb3QgQ0ExCzAJBgNVBAYTAlVTMB4XDTA5MTIyMzA1MDcyOVoX +DTE0MTIyMjA1MDcyOVowJzEOMAwGA1UEChMFSUNBTk4xFTATBgNVBAMTDElDQU5O +IFNTTCBDQTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAN3Gq798Zp2z +K5YAFMdgeo1iWyZLMNezTIJpxk1Nc/PUkSFdqzXwyAQO9KM14uEYqZgSA1j4n+t3 +VFuJgSbJqsL0yQyCVypeBelhF8wZGHHrNYPBhp3s8WvK3aGWC5XU4Q+eJG/cPNAo +nvJTRyuhrTIDyD8NgIB98ALSblosRCGbCVAVP6E908nIJOfqTpIvlJAu3udo9saz +kB+8yXuiZdcR6YvwOlq3FwffaeNuuVRqjjqqlH8sCqGturfZYGInp3FAO46whHu4 +yGfvZro9rMOF5Ya7p5z9tuHAEFM91H4bCeafIlynJwl+JxIz+t+bIC8U9xfA5B4H +kR/5ms2o4sUCAwEAAaNjMGEwDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8EBAMC +Af4wHwYDVR0jBBgwFoAUulLpSYMkhlIvx5nN/I1raQhNwFAwHQYDVR0OBBYEFG53 +qEAQSticDPK3WjqlL3lKYRTYMA0GCSqGSIb3DQEBCwUAA4IBAQAYQmLfqo5E5ocQ +TdmmssOXN0MuzvPgPMIv4XhgQakrXfQk9fZXogjsnInlVFCoMMYg5YrHi739mLYM +fRofAaFKTuwNKqqf/akgDbNcDzbALCvGdSIpZqM0vZM99ijakNV+kd/TBvZpi4Cb +pTSvagJb5FJ9Vk2Zbv7p0DaZWNmvzXmb5dJMNZDT4GiyiCsYOS68C9mChH8kEpLS +uRNPZLxG4Vxq7few1GYnJSGGtDpeGaPHi0uTuS434m2LRu5oOSF16P4qp4X9aCaW +vd358f6ZX7SklxtQGPohkFQMizAolHAZNJ5c4eVIk6+qo7SVsvVMl1BEWJfh/+ey +EN0s/sDt +-----END CERTIFICATE----- diff --git a/unbound/root.anchor b/unbound/root.anchor new file mode 100644 index 0000000..18367f8 --- /dev/null +++ b/unbound/root.anchor @@ -0,0 +1 @@ +. 98799 IN DNSKEY 257 3 8 AwEAAagAIKlVZrpC6Ia7gEzahOR+9W29euxhJhVVLOyQbSEW0O8gcCjFFVQUTf6v58fLj wBd0YI0EzrAcQqBGCzh/RStIoO8g0NfnfL2MTJRkxoXbfDaUeVPQuYEhg37NZWAJQ9VnM VDxP/VHL496M/QZxkjf5/Efucp2gaDX6RS6CXpoY68LsvPVjR0ZSwzz1apAzvN9dlzEhe X7ICJBBtuA6G3LQpzW5hOA2hzCTMjJPJ8LbqF6dsV6DoBQzgul0sGIcGOYl7OyQdXfZ57 relSQageu+ipAdTTJ25AsRTAoub8ONGcLmqrAmRLKBP1dfwhYB4N7knNnulqQxA+Uk1ih z0= ;{id = 19036 (ksk), size = 2048b} diff --git a/unbound/root.key b/unbound/root.key new file mode 100644 index 0000000..e340ed0 --- /dev/null +++ b/unbound/root.key @@ -0,0 +1,6 @@ +; // The root key in bind format. This can be read by most tools, including +; // named, unbound, et. For libunbound, use ub_ctx_trustedkeys() to load this +trusted-keys { +"." 257 3 8 "AwEAAagAIKlVZrpC6Ia7gEzahOR+9W29euxhJhVVLOyQbSEW0O8gcCjFFVQUTf6v58fL jwBd0YI0EzrAcQqBGCzh/RStIoO8g0NfnfL2MTJRkxoXbfDaUeVPQuYEhg37NZWAJQ9Vn MVDxP/VHL496M/QZxkjf5/Efucp2gaDX6RS6CXpoY68LsvPVjR0ZSwzz1apAzvN9dlzEh eX7ICJBBtuA6G3LQpzW5hOA2hzCTMjJPJ8LbqF6dsV6DoBQzgul0sGIcGOYl7OyQdXfZ5 7relSQageu+ipAdTTJ25AsRTAoub8ONGcLmqrAmRLKBP1dfwhYB4N7knNnulqQxA+Uk1i hz0="; // key id = 19036

+}; diff --git a/unbound/systemd/unbound-anchor.service b/unbound/systemd/unbound-anchor.service new file mode 100644 index 0000000..26656b3 --- /dev/null +++ b/unbound/systemd/unbound-anchor.service @@ -0,0 +1,9 @@ +[Unit] +Description=update of the root trust anchor for DNSSEC validation in unbound +Documentation=man:unbound-anchor(8)

+[Service] +Type=oneshot +User=unbound +ExecStart=/usr/sbin/unbound-anchor -a /var/lib/unbound/root.key -c /etc/unbound/icannbundle.pem +SuccessExitStatus=1 diff --git a/unbound/systemd/unbound-anchor.timer b/unbound/systemd/unbound-anchor.timer new file mode 100644 index 0000000..a87bf5c --- /dev/null +++ b/unbound/systemd/unbound-anchor.timer @@ -0,0 +1,14 @@ +[Unit] +Description=daily update of the root trust anchor for DNSSEC +Documentation=man:unbound-anchor(8)

+[Timer] +# Current DNSKEY TTL in root zone is 172800 seconds, i.e. 172800/60/60/24 = 2 days. +# It means that unboud-anchor should be run at least once a day. +OnCalendar=daily +Persistent=true +AccuracySec=24h

+[Install] +WantedBy=timers.target

diff --git a/unbound/systemd/unbound-keygen.service b/unbound/systemd/unbound-keygen.service new file mode 100644 index 0000000..576408a --- /dev/null +++ b/unbound/systemd/unbound-keygen.service @@ -0,0 +1,14 @@ +[Unit] +Description=Unbound Control Key And Certificate Generator +After=syslog.target +Before=unbound.service +ConditionPathExists=!/etc/unbound/unbound_control.key

+[Service] +Type=oneshot +Group=unbound +ExecStart=/usr/sbin/unbound-control-setup -d /etc/unbound/ +RemainAfterExit=yes

+[Install] +WantedBy=multi-user.target diff --git a/unbound/systemd/unbound.service b/unbound/systemd/unbound.service new file mode 100644 index 0000000..d225389 --- /dev/null +++ b/unbound/systemd/unbound.service @@ -0,0 +1,18 @@ +[Unit] +Description=Unbound recursive Domain Name Server +After=network.target +After=unbound-keygen.service +Wants=unbound-keygen.service +Wants=unbound-anchor.timer +Before=nss-lookup.target +Wants=nss-lookup.target

+[Service] +Type=simple +ExecStartPre=/usr/sbin/unbound-checkconf +ExecStartPre=-/usr/sbin/unbound-anchor -a /var/lib/unbound/root.key -c /etc/unbound/icannbundle.pem +ExecStart=/usr/sbin/unbound -d +ExecReload=/usr/sbin/unbound-control reload

+[Install] +WantedBy=multi-user.target diff --git a/unbound/unbound.conf b/unbound/unbound.conf new file mode 100644 index 0000000..4a97148 --- /dev/null +++ b/unbound/unbound.conf @@ -0,0 +1,655 @@ +# +# See unbound.conf(5) man page. +# +# this is a comment.

+#Use this to include other text into the file. +#include: "otherfile.conf"

+# The server clause sets the main parameters. +server:

• # whitespace is not necessary, but looks cleaner.
• # verbosity number, 0 is least verbose. 1 is default.
• verbosity: 1
• # print statistics to the log (for every thread) every N

seconds.

• # Set to "" or 0 to disable. Default is disabled.
• # Needed for munin plugin
• statistics-interval: 0
• # enable cumulative statistics, without clearing them after

printing.

• # Needed for munin plugin
• statistics-cumulative: yes
• # enable extended statistics (query types, answer codes,

status)

• # printed from unbound-control. default off, because of

speed.

• # Needed for munin plugin
• extended-statistics: yes
• # number of threads to create. 1 disables threading.
• num-threads: 2
• # specify the interfaces to answer queries from by ip

-address.

• # The default is to listen to localhost (127.0.0.1 and ::1).
• # specify 0.0.0.0 and ::0 to bind to all available

interfaces.

• # specify every interface on a new 'interface:' labelled

line.

• # The listen interfaces are not changed on reload, only on

restart.

• # interface: 0.0.0.0
• # interface: ::0
• # interface: 192.0.2.153
• # interface: 192.0.2.154
• # interface: 2001:DB8::5
• #
• # for dns over tls and raw dns over port 80
• # interface: 0.0.0.0@443
• # interface: ::0@443
• # interface: 0.0.0.0@80
• # interface: ::0@80
• # enable this feature to copy the source address of queries

to reply.

• # Socket options are not supported on all platforms.

experimental.

• # interface-automatic: yes
• #
• # NOTE: Enable this option when specifying interface 0.0.0.0

or ::0

• # NOTE: Disabled per Fedora policy not to listen to * on

default install

• # NOTE: If deploying on non-default port, eg 80/443, this

needs to be disabled

• interface-automatic: no
• # port to answer queries from
• # port: 53
• # specify the interfaces to send outgoing queries to

authoritative

• # server from by ip-address. If none, the default (all)

interface

• # is used. Specify every interface on a 'outgoing

-interface:' line.

• # outgoing-interface: 192.0.2.153
• # outgoing-interface: 2001:DB8::5
• # outgoing-interface: 2001:DB8::6
• # number of ports to allocate per thread, determines the

size of the

• # port range that can be open simultaneously. About double

the

• # num-queries-per-thread, or, use as many as the OS will

allow you.

• # outgoing-range: 4096
• # permit unbound to use this port number or port range for
• # making outgoing queries, using an outgoing interface.
• # Only ephemeral ports are allowed by SElinux
• outgoing-port-permit: 32768-65535
• # deny unbound the use this of port number or port range for
• # making outgoing queries, using an outgoing interface.
• # Use this to make sure unbound does not grab a UDP port

that some

• # other server on this computer needs. The default is to

avoid

• # IANA-assigned port numbers.
• # Our SElinux policy does not allow non-ephemeral ports to

be used

• outgoing-port-avoid: 0-32767
• # number of outgoing simultaneous tcp buffers to hold per

thread.

• # outgoing-num-tcp: 10
• # number of incoming simultaneous tcp buffers to hold per

thread.

• # incoming-num-tcp: 10
• # buffer size for UDP port 53 incoming (SO_RCVBUF socket

option).

• # 0 is system default. Use 4m to catch query spikes for

busy servers.

• # so-rcvbuf: 0
• # buffer size for UDP port 53 outgoing (SO_SNDBUF socket

option).

• # 0 is system default. Use 4m to handle spikes on very busy

servers.

• # so-sndbuf: 0
• # use SO_REUSEPORT to distribute queries over threads.
• # so-reuseport: no
• # EDNS reassembly buffer to advertise to UDP peers (the

actual buffer

• # is set with msg-buffer-size). 1480 can solve fragmentation

(timeouts).

• # edns-buffer-size: 4096
• # Maximum UDP response size (not applied to TCP response).
• # Suggested values are 512 to 4096. Default is 4096. 65536

disables it.

• # 3072 causes +dnssec any isc.org queries to need TC=1.

Helps mitigating DDOS

• max-udp-size: 3072
• # buffer size for handling DNS data. No messages larger than

this

• # size can be sent or received, by UDP or TCP. In bytes.
• # msg-buffer-size: 65552
• # the amount of memory to use for the message cache.
• # plain value in bytes or you can append k, m or G. default

is "4Mb".

• # msg-cache-size: 4m
• # the number of slabs to use for the message cache.
• # the number of slabs must be a power of 2.
• # more slabs reduce lock contention, but fragment memory

usage.

• # msg-cache-slabs: 4
• # the number of queries that a thread gets to service.
• # num-queries-per-thread: 1024
• # if very busy, 50% queries run to completion, 50% get

timeout in msec

• # jostle-timeout: 200
• # msec to wait before close of port on timeout UDP. 0

disables.

• # delay-close: 0
• # the amount of memory to use for the RRset cache.
• # plain value in bytes or you can append k, m or G. default

is "4Mb".

• # rrset-cache-size: 4m
• # the number of slabs to use for the RRset cache.
• # the number of slabs must be a power of 2.
• # more slabs reduce lock contention, but fragment memory

usage.

• # rrset-cache-slabs: 4
• # the time to live (TTL) value lower bound, in seconds.

Default 0.

• # If more than an hour could easily give trouble due to

stale data.

• # cache-min-ttl: 0
• # the time to live (TTL) value cap for RRsets and messages

in the

• # cache. Items are not cached for longer. In seconds.
• # cache-max-ttl: 86400
• # the time to live (TTL) value cap for negative responses in

the cache

• # cache-max-negative-ttl: 3600
• # the time to live (TTL) value for cached roundtrip times,

lameness and

• # EDNS version information for hosts. In seconds.
• # infra-host-ttl: 900
• # minimum wait time for responses, increase if uplink is

long. In msec.

• # infra-cache-min-rtt: 50
• # the number of slabs to use for the Infrastructure cache.
• # the number of slabs must be a power of 2.
• # more slabs reduce lock contention, but fragment memory

usage.

• # infra-cache-slabs: 4
• # the maximum number of hosts that are cached (roundtrip,

EDNS, lame).

• # infra-cache-numhosts: 10000
• # Enable IPv4, "yes" or "no".
• # do-ip4: yes
• # Enable IPv6, "yes" or "no".
• # do-ip6: yes
• # Enable UDP, "yes" or "no".
• # NOTE: if setting up an unbound on tls443 for public use,

you might want to

• # disable UDP to avoid being used in DNS amplification

attacks.

• # do-udp: yes
• # Enable TCP, "yes" or "no".
• # do-tcp: yes
• # upstream connections use TCP only (and no UDP), "yes" or

"no"

• # useful for tunneling scenarios, default no.
• # tcp-upstream: no
• # Detach from the terminal, run in background, "yes" or

"no".

• # do-daemonize: yes
• # control which clients are allowed to make (recursive)

queries

• # to this server. Specify classless netblocks with /size and

action.

• # By default everything is refused, except for localhost.
• # Choose deny (drop message), refuse (polite error reply),
• # allow (recursive ok), allow_snoop (recursive and

nonrecursive ok)

• # deny_non_local (drop queries unless can be answered from

local-data)

• # refuse_non_local (like deny_non_local but polite error

reply).

• # access-control: 0.0.0.0/0 refuse
• # access-control: 127.0.0.0/8 allow
• # access-control: ::0/0 refuse
• # access-control: ::1 allow
• # access-control: ::ffff:127.0.0.1 allow
• # if given, a chroot(2) is done to the given directory.
• # i.e. you can chroot to the working directory, for example,
• # for extra security, but make sure all files are in that

directory.

• #
• # If chroot is enabled, you should pass the configfile (from

the

• # commandline) as a full path from the original root. After

the

• # chroot has been performed the now defunct portion of the

config

• # file path is removed to be able to reread the config after

a reload.

• #
• # All other file paths (working dir, logfile, roothints, and
• # key files) can be specified in several ways:
• # o as an absolute path relative to the new root.
• # o as a relative path to the working directory.
• # o as an absolute path relative to the original

root.

• # In the last case the path is adjusted to remove the unused

portion.

• #
• # The pid file can be absolute and outside of the chroot, it

is

• # written just prior to performing the chroot and dropping

permissions.

• #
• # Additionally, unbound may need to access /dev/random (for

entropy).

• # How to do this is specific to your OS.
• #
• # If you give "" no chroot is performed. The path must not

end in a /.

• # chroot: "/var/lib/unbound"
• chroot: ""
• # if given, user privileges are dropped (after binding

port),

• # and the given username is assumed. Default is user

"unbound".

• # If you give "" no privileges are dropped.
• username: "unbound"
• # the working directory. The relative files in this config

are

• # relative to this directory. If you give "" the working

directory

• # is not changed.
• directory: "/etc/unbound"
• # the log file, "" means log to stderr.
• # Use of this option sets use-syslog to "no".
• # logfile: ""
• # Log to syslog(3) if yes. The log facility LOG_DAEMON is

used to

• # log to, with identity "unbound". If yes, it overrides the

logfile.

• # use-syslog: yes
• # print UTC timestamp in ascii to logfile, default is epoch

in seconds.

• log-time-ascii: yes
• # print one line with time, IP, name, type, class for every

query.

• # log-queries: no
• # the pid file. Can be an absolute path outside of

chroot/work dir.

• pidfile: "/var/run/unbound/unbound.pid"
• # file to read root hints from.
• # get one from ftp://FTP.INTERNIC.NET/domain/named.cache
• # root-hints: ""
• # enable to not answer id.server and hostname.bind queries.
• # hide-identity: no
• # enable to not answer version.server and version.bind

queries.

• # hide-version: no
• # the identity to report. Leave "" or default to return

hostname.

• # identity: ""
• # the version to report. Leave "" or default to return

package version.

• # version: ""
• # the target fetch policy.
• # series of integers describing the policy per dependency

depth.

• # The number of values in the list determines the maximum

dependency

• # depth the recursor will pursue before giving up. Each

integer means:

• # -1 : fetch all targets opportunistically,
• # 0: fetch on demand,
• # positive value: fetch that many targets

opportunistically.

• # Enclose the list of numbers between quotes ("").
• # target-fetch-policy: "3 2 1 0 0"
• # Harden against very small EDNS buffer sizes.
• # harden-short-bufsize: no
• # Harden against unseemly large queries.
• # harden-large-queries: no
• # Harden against out of zone rrsets, to avoid spoofing

attempts.

• harden-glue: yes
• # Harden against receiving dnssec-stripped data. If you turn

it

• # off, failing to validate dnskey data for a trustanchor

will

• # trigger insecure mode for that zone (like without a

trustanchor).

• # Default on, which insists on dnssec data for trust

-anchored zones.

• harden-dnssec-stripped: yes
• # Harden against queries that fall under dnssec-signed

nxdomain names.

• harden-below-nxdomain: yes
• # Harden the referral path by performing additional queries

for

• # infrastructure data. Validates the replies (if possible).
• # Default off, because the lookups burden the server.

Experimental

• # implementation of draft-wijngaards-dnsext-resolver-side

-mitigation.

• harden-referral-path: yes
• # Use 0x20-encoded random bits in the query to foil spoof

attempts.

• # This feature is an experimental implementation of draft

dns-0x20.

• # (this now fails on all GoDaddy customer domains, so

disabled)

• use-caps-for-id: no
• # Enforce privacy of these addresses. Strips them away from

answers.

• # It may cause DNSSEC validation to additionally mark it as

bogus.

• # Protects against 'DNS Rebinding' (uses browser as network

proxy).

• # Only 'private-domain' and 'local-data' names are allowed

to have

• # these private addresses. No default.
• # private-address: 10.0.0.0/8
• # private-address: 172.16.0.0/12
• # private-address: 192.168.0.0/16
• # private-address: 169.254.0.0/16
• # private-address: fd00::/8
• # private-address: fe80::/10
• # Allow the domain (and its subdomains) to contain private

addresses.

• # local-data statements are allowed to contain private

addresses too.

• # private-domain: "example.com"
• # If nonzero, unwanted replies are not only reported in

statistics,

• # but also a running total is kept per thread. If it reaches

the

• # threshold, a warning is printed and a defensive action is

taken,

• # the cache is cleared to flush potential poison out of it.
• # A suggested value is 10000000, the default is 0 (turned

off).

• unwanted-reply-threshold: 10000000
• # Do not query the following addresses. No DNS queries are

sent there.

• # List one address per entry. List classless netblocks with

/size,

• # do-not-query-address: 127.0.0.1/8
• # do-not-query-address: ::1
• # if yes, the above default do-not-query-address entries are

present.

• # if no, localhost can be queried (for testing and

debugging).

• # do-not-query-localhost: yes
• # if yes, perform prefetching of almost expired message

cache entries.

• prefetch: yes
• # if yes, perform key lookups adjacent to normal lookups.
• prefetch-key: yes
• # if yes, Unbound rotates RRSet order in response.
• rrset-roundrobin: yes
• # if yes, Unbound doesn't insert authority/additional

sections

• # into response messages when those sections are not

required.

• minimal-responses: yes
• # module configuration of the server. A string with

identifiers

• # separated by spaces. "iterator" or "validator iterator"
• # module-config: "validator iterator"
• # File with trusted keys, kept uptodate using RFC5011

probes,

• # initial file like trust-anchor-file, then it stores

metadata.

• # Use several entries, one per domain name, to track

multiple zones.

• #
• # If you want to perform DNSSEC validation, run unbound

-anchor before

• # you start unbound (i.e. in the system boot scripts). And

enable:

• # Please note usage of unbound-anchor root anchor is at your

own risk

• # and under the terms of our LICENSE (see that file in the

source).

• # auto-trust-anchor-file: "/var/lib/unbound/root.key"
• # File with DLV trusted keys. Same format as trust-anchor

-file.

• # There can be only one DLV configured, it is trusted from

root down.

• # Downloaded from

https://secure.isc.org/ops/dlv/dlv.isc.org.key

• #
• # ISC's DLV registry is being deprecated in the near future,

therefore

• # it is not used in the default configuration. The use of

ISC's DLV

• # registry is discouraged.
• # dlv-anchor-file: "/etc/unbound/dlv.isc.org.key"
• # File with trusted keys for validation. Specify more than

one file

• # with several entries, one file per entry.
• # Zone file format, with DS and DNSKEY entries.
• # trust-anchor-file: ""
• # File with trusted keys, kept uptodate using RFC5011

probes,

• # initial file like trust-anchor-file, then it stores

metadata.

• # Use several entries, one per domain name, to track

multiple zones.

• # auto-trust-anchor-file: ""
• # Trusted key for validation. DS or DNSKEY. specify the RR

on a

• # single line, surrounded by "". TTL is ignored. class is IN

default.

• # (These examples are from August 2007 and may not be valid

anymore).

• # trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5

AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ=="

• # trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1

14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A"

• # File with trusted keys for validation. Specify more than

one file

• # with several entries, one file per entry. Like trust

-anchor-file

• # but has a different file format. Format is BIND-9 style

format,

• # the trusted-keys { name flag proto algo "key"; }; clauses

are read.

• # trusted-keys-file: ""
• #
• # trusted-keys-file: /etc/unbound/rootkey.bind
• trusted-keys-file: /etc/unbound/keys.d/*.key
• auto-trust-anchor-file: "/var/lib/unbound/root.key"
• # Ignore chain of trust. Domain is treated as insecure.
• # domain-insecure: "example.com"
• # Override the date for validation with a specific fixed

date.

• # Do not set this unless you are debugging signature

inception

• # and expiration. "" or "0" turns the feature off.
• # val-override-date: ""
• # The time to live for bogus data, rrsets and messages. This

avoids

• # some of the revalidation, until the time interval expires.

in secs.

• # val-bogus-ttl: 60
• # The signature inception and expiration dates are allowed

to be off

• # by 10% of the lifetime of the signature from our local

clock.

• # This leeway is capped with a minimum and a maximum. In

seconds.

• # val-sig-skew-min: 3600
• # val-sig-skew-max: 86400
• # Should additional section of secure message also be kept

clean of

• # unsecure data. Useful to shield the users of this

validator from

• # potential bogus data in the additional section. All

unsigned data

• # in the additional section is removed from secure messages.
• val-clean-additional: yes
• # Turn permissive mode on to permit bogus messages. Thus,

messages

• # for which security checks failed will be returned to

clients,

• # instead of SERVFAIL. It still performs the security

checks, which

• # result in interesting log files and possibly the AD bit in
• # replies if the message is found secure. The default is

off.

• # NOTE: TURNING THIS ON DISABLES ALL DNSSEC SECURITY
• val-permissive-mode: no
• # Ignore the CD flag in incoming queries and refuse them

bogus data.

• # Enable it if the only clients of unbound are legacy

servers (w2008)

• # that set CD but cannot validate themselves.
• # ignore-cd-flag: no
• # Have the validator log failed validations for your

diagnosis.

• # 0: off. 1: A line per failed user query. 2: With reason

and bad IP.

• val-log-level: 1
• # It is possible to configure NSEC3 maximum iteration counts

per

• # keysize. Keep this table very short, as linear search is

done.

• # A message with an NSEC3 with larger count is marked

insecure.

• # List in ascending order the keysize and count values.
• # val-nsec3-keysize-iterations: "1024 150 2048 500 4096

2500"

• # instruct the auto-trust-anchor-file probing to add anchors

after ttl.

• # add-holddown: 2592000 # 30 days
• # instruct the auto-trust-anchor-file probing to del anchors

after ttl.

• # del-holddown: 2592000 # 30 days
• # auto-trust-anchor-file probing removes missing anchors

after ttl.

• # If the value 0 is given, missing anchors are not removed.
• # keep-missing: 31622400 # 366 days
• # the amount of memory to use for the key cache.
• # plain value in bytes or you can append k, m or G. default

is "4Mb".

• # key-cache-size: 4m
• # the number of slabs to use for the key cache.
• # the number of slabs must be a power of 2.
• # more slabs reduce lock contention, but fragment memory

usage.

• # key-cache-slabs: 4
• # the amount of memory to use for the negative cache (used

for DLV).

• # plain value in bytes or you can append k, m or G. default

is "1Mb".

• # neg-cache-size: 1m
• # By default, for a number of zones a small default 'nothing

here'

• # reply is built-in. Query traffic is thus blocked. If you
• # wish to serve such zone you can unblock them by

uncommenting one

• # of the nodefault statements below.
• # You may also have to use domain-insecure: zone to make

DNSSEC work,

• # unless you have your own trust anchors for this zone.
• # local-zone: "localhost." nodefault
• # local-zone: "127.in-addr.arpa." nodefault
• # local-zone:

"1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6. arpa." nodefault

• # local-zone: "10.in-addr.arpa." nodefault
• # local-zone: "16.172.in-addr.arpa." nodefault
• # local-zone: "17.172.in-addr.arpa." nodefault
• # local-zone: "18.172.in-addr.arpa." nodefault
• # local-zone: "19.172.in-addr.arpa." nodefault
• # local-zone: "20.172.in-addr.arpa." nodefault
• # local-zone: "21.172.in-addr.arpa." nodefault
• # local-zone: "22.172.in-addr.arpa." nodefault
• # local-zone: "23.172.in-addr.arpa." nodefault
• # local-zone: "24.172.in-addr.arpa." nodefault
• # local-zone: "25.172.in-addr.arpa." nodefault
• # local-zone: "26.172.in-addr.arpa." nodefault
• # local-zone: "27.172.in-addr.arpa." nodefault
• # local-zone: "28.172.in-addr.arpa." nodefault
• # local-zone: "29.172.in-addr.arpa." nodefault
• # local-zone: "30.172.in-addr.arpa." nodefault
• # local-zone: "31.172.in-addr.arpa." nodefault
• # local-zone: "168.192.in-addr.arpa." nodefault
• # local-zone: "0.in-addr.arpa." nodefault
• # local-zone: "254.169.in-addr.arpa." nodefault
• # local-zone: "2.0.192.in-addr.arpa." nodefault
• # local-zone: "100.51.198.in-addr.arpa." nodefault
• # local-zone: "113.0.203.in-addr.arpa." nodefault
• # local-zone: "255.255.255.255.in-addr.arpa." nodefault
• # local-zone:

"0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6. arpa." nodefault

• # local-zone: "d.f.ip6.arpa." nodefault
• # local-zone: "8.e.f.ip6.arpa." nodefault
• # local-zone: "9.e.f.ip6.arpa." nodefault
• # local-zone: "a.e.f.ip6.arpa." nodefault
• # local-zone: "b.e.f.ip6.arpa." nodefault
• # local-zone: "8.b.d.0.1.0.0.2.ip6.arpa." nodefault
• # And for 64.100.in-addr.arpa. to 127.100.in-addr.arpa.
• # if unbound is running service for the local host then it

is useful

• # to perform lan-wide lookups to the upstream, and unblock

the

• # long list of local-zones above. If this unbound is a dns

server

• # for a network of computers, disabled is better and stops

information

• # leakage of local lan information.
• # unblock-lan-zones: no
• # a number of locally served zones can be configured.
• # local-zone: <zone> <type>
• # local-data: "<resource record string>"
• # o deny serves local data (if any), else, drops queries.
• # o refuse serves local data (if any), else, replies with

error.

• # o static serves local data, else, nxdomain or nodata

answer.

• # o transparent gives local data, but resolves normally for

other names

• # o redirect serves the zone data for any subdomain in the

zone.

• # o nodefault can be used to normally resolve AS112 zones.
• # o typetransparent resolves normally for other types and

other names

• # o inform resolves normally, but logs client IP address
• #
• # defaults are localhost address, reverse for 127.0.0.1 and

::1

• # and nxdomain for AS112 zones. If you configure one of

these zones

• # the default content is omitted, or you can omit it with

'nodefault'.

• #
• # If you configure local-data without specifying local-zone,

by

• # default a transparent local-zone is created for the data.
• #
• # You can add locally served data with
• # local-zone: "local." static
• # local-data: "mycomputer.local. IN A 192.0.2.51"
• # local-data: 'mytext.local TXT "content of text record"'
• #
• # You can override certain queries with
• # local-data: "adserver.example.com A 127.0.0.1"
• #
• # You can redirect a domain to a fixed address with
• # (this makes example.com, www.example.com, etc, all go to

192.0.2.3)

• # local-zone: "example.com" redirect
• # local-data: "example.com A 192.0.2.3"
• #
• # Shorthand to make PTR records, "IPv4 name" or "IPv6 name".
• # You can also add PTR records using local-data directly,

but then

• # you need to do the reverse notation yourself.
• # local-data-ptr: "192.0.2.3 www.example.com"
• include: /etc/unbound/local.d/*.conf
• # service clients over SSL (on the TCP sockets), with plain

DNS inside

• # the SSL stream. Give the certificate to use and private

key.

• # default is "" (disabled). requires restart to take

effect.

• # ssl-service-key: "/etc/unbound/unbound_server.key"
• # ssl-service-pem: "/etc/unbound/unbound_server.pem"
• # ssl-port: 443
• # request upstream over SSL (with plain DNS inside the SSL

stream).

• # Default is no. Can be turned on and off with unbound

-control.

• # ssl-upstream: no
• # DNS64 prefix. Must be specified when DNS64 is use.
• # Enable dns64 in module-config. Used to synthesize IPv6

from IPv4.

• # dns64-prefix: 64:ff9b::0/96

+# Python config section. To enable: +# o use --with-pythonmodule to configure before compiling. +# o list python in the module-config string (above) to enable. +# o and give a python-script to run. +python:

• # Script file to load
• # python-script: "/etc/unbound/ubmodule-tst.py"

+# Remote control config section. +remote-control:

• # Enable remote control with unbound-control(8) here.
• # set up the keys and certificates with unbound-control

-setup.

• # Note: required for unbound-munin package
• control-enable: yes
• # Set to no and use an absolute path as control-interface to

use

• # a unix local named pipe for unbound-control.
• # control-use-cert: yes
• # what interfaces are listened to for remote control.
• # give 0.0.0.0 and ::0 to listen to all interfaces.
• # control-interface: 127.0.0.1
• # control-interface: ::1
• # port number for remote control operations.
• # control-port: 953
• # unbound server key file.
• server-key-file: "/etc/unbound/unbound_server.key"
• # unbound server certificate file.
• server-cert-file: "/etc/unbound/unbound_server.pem"
• # unbound-control key file.
• control-key-file: "/etc/unbound/unbound_control.key"
• # unbound-control certificate file.
• control-cert-file: "/etc/unbound/unbound_control.pem"

+# Stub and Forward zones

+include: /etc/unbound/conf.d/*.conf

+# Stub zones. +# Create entries like below, to make all queries for 'example.com' and +# 'example.org' go to the given list of nameservers. list zero or more +# nameservers by hostname or by ipaddress. If you set stub-prime to yes, +# the list is treated as priming hints (default is no). +# stub-zone: +# name: "example.com" +# stub-addr: 192.0.2.68 +# stub-prime: "no" +# stub-zone: +# name: "example.org" +# stub-host: ns.example.com. +# You can now also dynamically create and delete stub-zone's using +# unbound-control stub_add domain.com 1.2.3.4 5.6.7.8 +# unbound-control stub_remove domain.com 1.2.3.4 5.6.7.8

+# Forward zones +# Create entries like below, to make all queries for 'example.com' and +# 'example.org' go to the given list of servers. These servers have to handle +# recursion to other nameservers. List zero or more nameservers by hostname +# or by ipaddress. Use an entry with name "." to forward all queries. +# If you enable forward-first, it attempts without the forward if it fails. +# forward-zone: +# name: "example.com" +# forward-addr: 192.0.2.68 +# forward-addr: 192.0.2.73@5355 # forward to port 5355. +# forward-first: no +# forward-zone: +# name: "example.org" +# forward-host: fwd.example.com +# +# You can now also dynamically create and delete forward-zone's using +# unbound-control forward_add domain.com 1.2.3.4 5.6.7.8 +# unbound-control forward_remove domain.com 1.2.3.4 5.6.7.8 diff --git a/unbound/unbound.nm b/unbound/unbound.nm new file mode 100644 index 0000000..c8a0d09 --- /dev/null +++ b/unbound/unbound.nm @@ -0,0 +1,162 @@ +#################################################################### ########### +# IPFire.org - An Open Source Firewall Solution # +# Copyright (C) - IPFire Development Team info@ipfire.org # +#################################################################### ###########

+name = unbound +version = 1.5.5 +release = 1

+groups = System/Daemons +url = http://www.nlnetlabs.nl/unbound/ +license = BSD +summary = A validating, recursive, and caching DNS(SEC) resolver.

+description

• Unbound is a validating, recursive, and caching DNS(SEC)

resolver.

• The C implementation of Unbound is developed and maintained

by NLnet

• Labs and is based on ideas and algorithms taken from a java

prototype

• developed by Verisign labs, Nominet, Kirei and ep.net.

Unbound is

• designed as a set of modular components, so that also
• DNSSEC (secure DNS) validation and stub-resolvers are easily

possible. +end

+source_dl = http://www.unbound.net/downloads/

+build

• requires

• expat-devel
  

• libevent-devel
  

• openssl-devel >= 1.0.1h-2
  

• python3-devel >= 3.4
  

• swig
  

• end
• configure_options += \

• --with-conf-file=%{sysconfdir}/%{name}/unbound.conf
  

\

• --with
  

-pidfile=%{localstatedir}/run/%{name}/%{name}.pid \

• --with-rootkey
  

-file=%{sharedstatedir}/unbound/root.key \

• --with-libevent \
  

• --with-pthreads \
  

• --disable-rpath \
  

• --disable-static \
  

• --with-ssl \
  

• --enable-sha2 \
  

• --with-pythonmodule \
  

• --with-pyunbound PYTHON=%{python3}
  

• prepare_cmds

• %{create_user}
  

• end
• test

• make check
  

• end
• install_cmds

• # Create directories.
  

• mkdir -pv %{BUILDROOT}%{localstatedir}/run/%{name}
  

• mkdir -pv %{BUILDROOT}%{sharedstatedir}/%{name}
  

• # Directory for user specified and additional config
  

files.

• mkdir -pv %{BUILDROOT}%{sysconfdir}/%{name}/conf.d/
  

• # Directory for stub and forward zones.
  

• mkdir -pv %{BUILDROOT}%{sysconfdir}/%{name}/local.d/
  

• # Directory for trusted-keys-file.
  

• mkdir -pv %{BUILDROOT}%{sysconfdir}/%{name}/keys.d/
  

• # Install unbound config file.
  

• install -p -m 0664 %{DIR_SOURCE}/%{name}.conf \
  

• 	%{BUILDROOT}%{sysconfdir}/%{name}/
  

• # Install pem file for icannbundle.
  

• install -p -m 0664 %{DIR_SOURCE}/icannbundle.pem \
  

• 	%{BUILDROOT}%{sysconfdir}/%{name}/
  

• # Install root and DLV keys.
  

• install -p -m 0644 %{DIR_SOURCE}/root.key \
  

• 	%{BUILDROOT}%{sysconfdir}/%{name}/
  

• install -p -m 0664 %{DIR_SOURCE}/dlv.isc.org.key \
  

• 	%{BUILDROOT}%{sysconfdir}/%{name}/
  

• install -p -m 0664 %{DIR_SOURCE}/root.anchor \
  

• 	%{BUILDROOT}%{sharedstatedir}/%{name}/root.k
  

ey

• # Fix ownership.
  

• chown -R unbound:unbound
  

%{BUILDROOT}%{sharedstatedir}/%{name}/

• end

+end

+create_user

• getent group unound >/dev/null || /usr/sbin/groupadd -r

unbound

• getent passwd unbound >/dev/null || /usr/sbin/useradd -r -g

unbound \

• -d %{sysconfdir}/%{name} -s /sbin/nologin unbound
  

+end

+packages

• package %{name}

• prerequires
  

• 	shadow-utils
  

• 	systemd-units
  

• end
  

• requires += \
  

• 	openssl >= 1.0.1h-2
  

• configfiles
  

• 	%{sysconfdir}/%{name}.conf
  

• end
  

• datafiles
  

• 	%{sysconfdir}/%{name}/conf.d/
  

• 	%{sysconfdir}/%{name}/local.d/
  

• 	%{sysconfdir}/%{name}/keys.d/
  

• end
  

• script prein
  

• 	%{create_user}
  

• end
  

• script postin
  

• 	/bin/systemctl daemon-reload >/dev/null 2>&1
  

|| :

• 	# Enable root anchor for DNSSEC validation.
  

• 	systemctl enable unbound-anchor.timer
  

...

/dev/null 2>&1 || :

• end
  

• script preun
  

• 	systemctl --no-reload disable unbound
  

-anchor.timer >/dev/null 2>&1 || :

• 	systemctl --no-reload disable unbound
  

-keygen.service >/dev/null 2>&1 || :

• 	systemctl --no-reload disable
  

unbound.service >/dev/null 2>&1 || :

• 	systemctl stop unbound.service >/dev/null
  

2>&1 || :

• 	systemctl stop unbound-keygen.service
  

...

/dev/null 2>&1 || :

• end
  

• script postun
  

• 	systemctl daemon-reload >/dev/null 2>&1 || :
  

• end
  

• script postup
  

• 	systemctl daemon-reload >/dev/null 2>&1 || :
  

• 	systemctl try-restart unbound-keygen.service
  

...

/dev/null 2>&1 || :

• 	systemctl try-restart unbound.service
  

...

/dev/null 2>&1 || :

• end
  

• end
• package %{name}-libs

• template LIBS
  

• end
• package python3-%{name}

• template PYTHON3
  

• end
• package %{name}-devel

• template DEVEL
  

• end
• package %{name}-debuginfo

• template DEBUGINFO
  

• end

+end diff --git a/unbound/unbound.tmpfiles b/unbound/unbound.tmpfiles new file mode 100644 index 0000000..d625589 --- /dev/null +++ b/unbound/unbound.tmpfiles @@ -0,0 +1 @@ +D /var/run/unbound 0755 unbound unbound -